Df engine question
11-01-2005 | 12:33 PM
#1
Thread Starter
Junior Member
My Feedback: (6)
Joined: Mar 2002
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
From: Hattiesburg, MS
Df engine question
Hi everyone
Has anyone tried the .40 GRRT PYLON engine from MVVS for ducted fan use? Its specs look close and it not too expensive. see link for the engine
http://morrishobbies.com/product_inf...96cd95af4c5906
thanks
Kev
Has anyone tried the .40 GRRT PYLON engine from MVVS for ducted fan use? Its specs look close and it not too expensive. see link for the engine
http://morrishobbies.com/product_inf...96cd95af4c5906
thanks
Kev
11-01-2005 | 05:08 PM
#2
My Feedback: (1)
Joined: Dec 2001
Posts: 1,149
Likes: 0
Received 0 Likes
on
0 Posts
From: South Plainfield, NJ
RE: Df engine question
Kev,
I don't think you will get the RPM you need for a fan out of this engine. Plus it is wider than most fan mounts. The GRRT works well with props though.
Mark
I don't think you will get the RPM you need for a fan out of this engine. Plus it is wider than most fan mounts. The GRRT works well with props though.
Mark
11-02-2005 | 09:49 AM
#3
Senior Member
Joined: Jul 2002
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
From: STO DGO , DOMINICAN REPUBLIC
RE: Df engine question
if you can fit one in a kress 740 fan , www.kress-jets.com , you may be able to fly small ducted fan jets, like the F-86 from electric jet factory( formely HOB ) or the f-4 FROM JD enterprise ; i dont think that you could fly regular .45 size jets ( like jet hangar ) with that combination
Pecojets
