Need Help w/BVM Mav.Pro
#1
Thread Starter

My Feedback: (59)
Joined: Jan 2002
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
From: Va Beach,
VA
Hello,
Im posting this for a good friend of mine that just bought a beautiful RTF BVM Maverick Pro. However, it did not come with a manual and we have a few questions.
Can anybody give us some recomended settings for high and low rates for the elevator and ailerons, how heavy should she be, and the location of C.G.
Any help you jet jocks can give will be greatly appreciated, and it may prevent another tragic loss of a beautiful airplane.
Thanks, Joey.
Im posting this for a good friend of mine that just bought a beautiful RTF BVM Maverick Pro. However, it did not come with a manual and we have a few questions.
Can anybody give us some recomended settings for high and low rates for the elevator and ailerons, how heavy should she be, and the location of C.G.
Any help you jet jocks can give will be greatly appreciated, and it may prevent another tragic loss of a beautiful airplane.
Thanks, Joey.
#2

My Feedback: (37)
Joined: Dec 2001
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
From: Marysville,
WA
Here you go.
Rudder- 1-1/8" left and right
Elevators- 3/4" up, 1/2" down
Ailerons- 5/8" up, 1/2" down
Flaps- 15 and 40 degrees
CG- 5-1/2" from the rear of the leading edge, measured at the root.
Great plane! Godd luck and enjoy!!
BTW, sorry I can't help with dual rates, I just completed mine, and haven't flown it yet. The above specs are from the manual.
Rudder- 1-1/8" left and right
Elevators- 3/4" up, 1/2" down
Ailerons- 5/8" up, 1/2" down
Flaps- 15 and 40 degrees
CG- 5-1/2" from the rear of the leading edge, measured at the root.
Great plane! Godd luck and enjoy!!
BTW, sorry I can't help with dual rates, I just completed mine, and haven't flown it yet. The above specs are from the manual.



