I ordered some male & female Futaba plugs from Servo & Stuff, & the male plugs were garbage. For you guys that make your own extensions, where do you get your supplies?
Thanks

Dreamworks is a good source

get mine from hobby city make sure you have good crimper

I buy my stuff here www.cheapyharnesses.com. As for crimping tool, get a good one from Radio Shack or Fry's. I have the $10 one from these guys and it also works great. I also use a wire stripper from Radio Shack, which is a POS if you ask me.

Once you start naking your harnesses, you'll never go back.

David

This is a good source also.
http://www.hansenhobbies.com/

Peak Electronics. Their pins are heavy duty, the plastic components are the best and the sleeves for the female plugs are full length.

I have tried all the others, including Hansen Hobbies, and the Peak stuff is superior. It is exactly what you get if you order JR heavy duty pre-made extensions.

Thanks guys.. FYI, the male plugs from Servos & Stuff dont hold in the stock Futaba, or the female plugs from Servo's & stuff. They just fall right out like they're too small. Not sure if I have a Bad batch, but I wont be ordering from that place again.