Guys,

I have the Dreamworks glue in fuel fitting and I need a 90 degree barbed fitting so I can properly route the fuel tubing. See pictures...

Can anyone dial me on where to get one?

Thanks!

I'd say mcmaster-carr would be the best bet..   not sure what the thread sizes are.. if i had to guess, probly a 1/16 NPT?

Can anyone comment on thread size on the Dreamworks fitting?

http://www.centralhobbies.com/Fuel/fittings.htm

http://www.bvmjets.com/Pages/fuelcells1.htm#KA Looks a lot like the one from BVM.

Take it to your local Fastenal store. They can can get it. www.fastenal.com

SMC do something which would probably suit, something along these lines possibly....

www.smcetech.com/CC_host/pages/custom/templates/smc_v2/prodtree_product_2.cfm

marcs

Take all the guess work out save yourself the time. Just call Patty at BVM. I just ordered these pieces for my Skymaster stuff.

have a good one.

Tell your son hi for me. I want to do some helo flying with him when you get up to Montana.


Justin Sands
BVM rep
Team JR/Horizon

If you have room why not just come off the straight nipple with a little peice of tubing and then a simple 90 from there??
V..

Justin, where exactly is that 90 degree fitting on the BVM site?

Take a look at the accessories online section under kevlar tank accessories it shows them there.

Hey guys, thanks for all the efforts....

I was able to find a brass fitting at the industrial supply house...I will post a picture when I get a chance...

Justin, helo's are loaded. Jake may not make the trip, he has made All-Stars and is headed for the state championship....

Bandit, I can see the fittings in the picture but the brass 90 degree is not the same as that posted in the first instant - this BVM item is used as the vent in most cases and not to screw into the main tank fitting.
Sorry if I have missed something.

marcs

For anyone who stills needs these I found them here:

http://www.airpowernet.com/twe3/prod...roducts_id=317

I made my own as required...would have been easier to just buy these but I found them a day too late!

Dave,

By the way, Steve sent me two to give you.

Chad