Tail pipes ?
03-10-2010 | 04:15 PM
#1
Thread Starter
Senior Member
Joined: Oct 2007
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
From: casula, AUSTRALIA
Tail pipes ?
hi there every one im looking into having my own tail pipe made up buy a mate but im unsure as to what thickness of stainless stell in comonly used i fully understand how to have it made but have found no info for steel thickness anyhelp would be greatly apreciated thanks
03-10-2010 | 04:36 PM
#2
My Feedback: (1)
Joined: Jan 2002
Posts: 2,370
Received 0 Likes
on
0 Posts
From: kenilworth , UNITED KINGDOM
RE: Tail pipes ?
.10mm if you are brave and .20 if you want to be safe.
It can be hard to find too but if you google "shim steel" or "stainless shim" you will find it.
I get mine from [link=http://www.repco-tech.co.uk/html/contactus/]Here[/link]
Jason
It can be hard to find too but if you google "shim steel" or "stainless shim" you will find it.
I get mine from [link=http://www.repco-tech.co.uk/html/contactus/]Here[/link]
Jason
03-10-2010 | 09:03 PM
#5
Thread Starter
Senior Member
Joined: Oct 2007
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
From: casula, AUSTRALIA
RE: Tail pipes ?
thanks for the help i have found some 316 i was gunna go with a twin wall pipe so what do you think of using the .127mm should be fine ? has anyone made ther own before ?
