KingTech K-170 Debut
#1
Thread Starter
My Feedback: (21)
KingTech K-170 Debut
Here it is. The first KingTech K-170 in the U.S.
I spoke withe Barry Hou of WWW.KingTechUSA.com and it will be called the K-170. It puts out 37 pounds of thrust plus. I did get the opertunity to run the engine up and all I can say is WOW. This engine pushes hard. It was all I could do to hold the Jet back.
The F-18 and the KingTech K-170 will be debuted at Jets over Kentucky. Barry will be putting it through its paces.
See you there.
Joe Lewis
KingTech K-80 owner x 2
I spoke withe Barry Hou of WWW.KingTechUSA.com and it will be called the K-170. It puts out 37 pounds of thrust plus. I did get the opertunity to run the engine up and all I can say is WOW. This engine pushes hard. It was all I could do to hold the Jet back.
The F-18 and the KingTech K-170 will be debuted at Jets over Kentucky. Barry will be putting it through its paces.
See you there.
Joe Lewis
KingTech K-80 owner x 2
#2
RE: KingTech K-170 Debut
Yes, Thank you Lewis, with improved design of various internal components and their alignment, the engine runs mostly around or under 600 degrees and with higher thrust than anticipated of solid 37+ lbs; the factory re-designated it to K-170, also comes with limited life time warranty.
Barry
Barry
#6
Member
Join Date: Mar 2010
Location: johannesburgjohannesburg, SOUTH AFRICA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
RE: KingTech K-170 Debut
Hi Barry the K170 looks awesome,ill be reciving my large skymaster hawk next week and i think it would be the perfect match for this airframe.
We have run many K80's in south africa and i am very impressed with them.
Well done on the development ,if the 170 is as good as the 80 you have a winner.
My next turbine is definetly a K170.
Regards Greg
We have run many K80's in south africa and i am very impressed with them.
Well done on the development ,if the 170 is as good as the 80 you have a winner.
My next turbine is definetly a K170.
Regards Greg
#7
My Feedback: (15)
RE: KingTech K-170 Debut
ORIGINAL: marquisvns
Hi Andy, it is $2950 and we are now taking orders as well as seeking reps to be eligible for discount
Barry
626-793-4677
Hi Andy, it is $2950 and we are now taking orders as well as seeking reps to be eligible for discount
Barry
626-793-4677
#8
RE: KingTech K-170 Debut
Thanks Greg for your kind words, let me know if I could help you with one. As far as Kentucky, we will do a $100 off $2,950 for anyone who orders before July 11th.
Kingtech Lifetime* Limited Warranty
Kingtech warrants that this MINIATURE TURBOJET ENGINE for model aircraft, cars
or boats (“Model Engineâ€) enclosed with this warranty statement is free from defects
in materials and workmanship during normal usage, according to the following terms
and conditions.
1) The limited warranty extends to the original purchaser ("Buyer") of the Model
Engine and is transferable to any subsequent purchaser / end-user for a re-registration fee of $150.
2) Warranty coverage begins the day you buy the turbine to the day you sell or crash
turbine (which ever comes first), all parts except for electric motors, glow
plug, valves, ECU & HDT/GSU, pump and all frictional materials/components including but not limited to the bearings, will be repaired or replaced
free of charge. All parts, including repaired and replaced parts are covered for the
original warranty period. When the warranty on the turbine expires, the warranty on
all replaced and repaired parts also expires. The ECU is warranted for 1 year of
purchased.
3) Buyer must fully accept all conditions of the PURCHASE AGREEMENT, FULL
ASSUMPTION OF LIABILITY AND INDEMNITY AGREEMENT
4) During the warranty period Kingtech will repair or replace, at Kingtech’s option,
any defective parts with new or factory rebuilt replacement items if such repair or
replacement is needed because of Model Engine malfunction or failure during normal
usage. No charge will be made to the Buyer for any such parts. Kingtech will also pay
for the labor charges incurred by Kingtech in repairing or replacing the defective
parts. The limited warranty does not cover defects in appearance. Kingtech shall not
be liable for any other losses or damages.
5) Upon request from Kingtech, the Buyer must prove the date of the original
purchase of the Model Engine by a dated bill of sale or dated itemized receipt.
6) The Buyer must bear the cost of shipping the turbine to and from Kingtech, Taiwan.
7) The Buyer shall have no coverage or benefits under this lifetime warranty if any of
the following conditions are applicable
a) The Model Engine has been subject to abnormal use, abnormal conditions,
improper storage, unauthorized modifications, unauthorized repair, misuse, neglect,
abuse, accident, alteration, improper installation or other acts which are not the fault
of Kingtech, including damage caused by shipping.
b) The Model Engine has been damaged from external causes such as crash damage,
foreign object damage, weather, Act of God, improper electrical connections, or
connections to other products not recommend for interconnection by Kingtech.
Page 5 MNM©2009
c) The Model Engine is operated for commercial or institutional use.
d) The Model Engine serial number has been removed, defaced or altered.
8) If a problem develops during the warranty period, the Buyer shall take the following
step-by-step procedure:
a) The Buyer shall ship the Model Engine prepaid and insured to Kingtech, Taiwan.
b) The Buyer shall include a return address, daytime phone number and / or FAX
number, complete description of the problem and proof of purchase.
c) The Buyer will be billed for any parts or labor charges not covered by this warranty.
d) If the Model Engine is returned to Kingtech during the warranty period, but the
problem with the Model Engine is not covered under the terms and conditions of this
warranty, the Buyer will be notified and given an estimate of the charges the Buyer
must pay to have the Model Engine repaired, with all shipping charges billed to the
Buyer. If the estimate is refused, the Model Engine will be returned freight collect. If
the Model Engine is returned to Kingtech after the expiration of the warranty period,
Kingtech’s normal service policies shall apply and the Buyer will be responsible for all
shipping charges.
9) The Model Engine consists of newly assembled equipment that may contain used
components that have been reprocessed to allow machine compliance with Model
Engine performance and reliability specifications.
10) Kingtech shall not be liable for delay in rendering service under the limited
warranty, or loss of use during the period that the Model Engine is being repaired.
11) Kingtech neither assumes nor authorizes any other person or entity to assume for
it any other obligation or liability beyond that is expressly provided for in this limited
warranty.
12) This is the entire warranty between Kingtech and the Buyer, and supersedes all
prior and contemporaneous agreements or understandings, oral or written, and all
communications relating to the Model Engine, and no representation, promise or
condition not contained herein shall modify these terms.
13) If the Buyer is not prepared to fully accept the liability associated with the use of
this Model Engine, the Buyer is advised to return this Model Engine immediately in
new and unused condition to the place of purchase.
14) This lifetime warranty allocates the risk of failure of the Model Engine between the
Buyer and Kingtech. The allocation is recognized by the Buyer and is reflected in the
purchase price of the Model Engine.
Kingtech Lifetime* Limited Warranty
Kingtech warrants that this MINIATURE TURBOJET ENGINE for model aircraft, cars
or boats (“Model Engineâ€) enclosed with this warranty statement is free from defects
in materials and workmanship during normal usage, according to the following terms
and conditions.
1) The limited warranty extends to the original purchaser ("Buyer") of the Model
Engine and is transferable to any subsequent purchaser / end-user for a re-registration fee of $150.
2) Warranty coverage begins the day you buy the turbine to the day you sell or crash
turbine (which ever comes first), all parts except for electric motors, glow
plug, valves, ECU & HDT/GSU, pump and all frictional materials/components including but not limited to the bearings, will be repaired or replaced
free of charge. All parts, including repaired and replaced parts are covered for the
original warranty period. When the warranty on the turbine expires, the warranty on
all replaced and repaired parts also expires. The ECU is warranted for 1 year of
purchased.
3) Buyer must fully accept all conditions of the PURCHASE AGREEMENT, FULL
ASSUMPTION OF LIABILITY AND INDEMNITY AGREEMENT
4) During the warranty period Kingtech will repair or replace, at Kingtech’s option,
any defective parts with new or factory rebuilt replacement items if such repair or
replacement is needed because of Model Engine malfunction or failure during normal
usage. No charge will be made to the Buyer for any such parts. Kingtech will also pay
for the labor charges incurred by Kingtech in repairing or replacing the defective
parts. The limited warranty does not cover defects in appearance. Kingtech shall not
be liable for any other losses or damages.
5) Upon request from Kingtech, the Buyer must prove the date of the original
purchase of the Model Engine by a dated bill of sale or dated itemized receipt.
6) The Buyer must bear the cost of shipping the turbine to and from Kingtech, Taiwan.
7) The Buyer shall have no coverage or benefits under this lifetime warranty if any of
the following conditions are applicable
a) The Model Engine has been subject to abnormal use, abnormal conditions,
improper storage, unauthorized modifications, unauthorized repair, misuse, neglect,
abuse, accident, alteration, improper installation or other acts which are not the fault
of Kingtech, including damage caused by shipping.
b) The Model Engine has been damaged from external causes such as crash damage,
foreign object damage, weather, Act of God, improper electrical connections, or
connections to other products not recommend for interconnection by Kingtech.
Page 5 MNM©2009
c) The Model Engine is operated for commercial or institutional use.
d) The Model Engine serial number has been removed, defaced or altered.
8) If a problem develops during the warranty period, the Buyer shall take the following
step-by-step procedure:
a) The Buyer shall ship the Model Engine prepaid and insured to Kingtech, Taiwan.
b) The Buyer shall include a return address, daytime phone number and / or FAX
number, complete description of the problem and proof of purchase.
c) The Buyer will be billed for any parts or labor charges not covered by this warranty.
d) If the Model Engine is returned to Kingtech during the warranty period, but the
problem with the Model Engine is not covered under the terms and conditions of this
warranty, the Buyer will be notified and given an estimate of the charges the Buyer
must pay to have the Model Engine repaired, with all shipping charges billed to the
Buyer. If the estimate is refused, the Model Engine will be returned freight collect. If
the Model Engine is returned to Kingtech after the expiration of the warranty period,
Kingtech’s normal service policies shall apply and the Buyer will be responsible for all
shipping charges.
9) The Model Engine consists of newly assembled equipment that may contain used
components that have been reprocessed to allow machine compliance with Model
Engine performance and reliability specifications.
10) Kingtech shall not be liable for delay in rendering service under the limited
warranty, or loss of use during the period that the Model Engine is being repaired.
11) Kingtech neither assumes nor authorizes any other person or entity to assume for
it any other obligation or liability beyond that is expressly provided for in this limited
warranty.
12) This is the entire warranty between Kingtech and the Buyer, and supersedes all
prior and contemporaneous agreements or understandings, oral or written, and all
communications relating to the Model Engine, and no representation, promise or
condition not contained herein shall modify these terms.
13) If the Buyer is not prepared to fully accept the liability associated with the use of
this Model Engine, the Buyer is advised to return this Model Engine immediately in
new and unused condition to the place of purchase.
14) This lifetime warranty allocates the risk of failure of the Model Engine between the
Buyer and Kingtech. The allocation is recognized by the Buyer and is reflected in the
purchase price of the Model Engine.
#10
RE: KingTech K-170 Debut
Greg,
Get me one too, I promise to pay you back
Only thing is how does the price change when you order through our local "concept" hobby shop? And is there a benefit to this, are they the agents?
Get me one too, I promise to pay you back
Only thing is how does the price change when you order through our local "concept" hobby shop? And is there a benefit to this, are they the agents?
#14
Member
Join Date: Mar 2010
Location: johannesburgjohannesburg, SOUTH AFRICA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
RE: KingTech K-170 Debut
No problem ITH
anything els i can get you with that? lol
I get a feeling Morne is the dealer.(mmmm maby i need to test one here at altitude for him)
anything els i can get you with that? lol
I get a feeling Morne is the dealer.(mmmm maby i need to test one here at altitude for him)
#15
RE: KingTech K-170 Debut
A Hawk 100 with a decent color scheme would be nice.
Anyway lets see what yours comes out like, order the motor anyway, Rod will pay with a bit of persuasion i am sure.
Anyway lets see what yours comes out like, order the motor anyway, Rod will pay with a bit of persuasion i am sure.
#16
My Feedback: (106)
RE: KingTech K-170 Debut
Barry, that is one nice looking turbine. I think once the secret gets out that these are a class act for a class price, KingTech will change the face of turbine buying. Like the man said a few post ago, If the 170 performs as well as our K80's do, it's going to be a winner, hands down!!!!
#18
RE: KingTech K-170 Debut
Thank you Roy,
Hippo, they are available now, but being so new of a product, we don't even have an inventory here in California. So, we could do a Credit Card transaction and the 170 will be shipped from Taiwan within 2 working days directly to you.
Hope this helps,
Barry
Hippo, they are available now, but being so new of a product, we don't even have an inventory here in California. So, we could do a Credit Card transaction and the 170 will be shipped from Taiwan within 2 working days directly to you.
Hope this helps,
Barry
#21
RE: KingTech K-170 Debut
Thank you Tony, the video looks great, all temp around mid 500s This engine is going to be very reliable
So, do you have an airframe in mind to install a K-170E?
Barry
So, do you have an airframe in mind to install a K-170E?
Barry
#23
RE: KingTech K-170 Debut
That's only brief upon a sudden acceleration from idle, typical with all turbine operations. The temperature went from 450 to less than 570, still quite a bit of room to be more aggressive on the adjustment, even so, it's already under 4 seconds.
Barry
Barry
#24
RE: KingTech K-170 Debut
Hey,
I got a chance to see and handle one of these the other day. I gotta admit, it looked really nice! I spun the wheel and the bearings seemed very smooth with what felt like a perfect preload. Good job, guys!
I got a chance to see and handle one of these the other day. I gotta admit, it looked really nice! I spun the wheel and the bearings seemed very smooth with what felt like a perfect preload. Good job, guys!