Jet Central Flea??
 

Does anyone have anymore information on this turbine?

Mark

RE: Jet Central Flea??
 

Hi Mark, we already have quite a few customers signed up for this engine when it is released. Felipe has been flying the engine for quite some time now, development flights have gone very well.

Flea specs are:Thrust 6 pounds, weight 12oz (340g), diameter 2.36 inch (60mm), length 5.37 inch (136mm), RPM 80,000-220,000

This gem of a turbine is planned for release later this year. The Flea has the same outstanding throttle response times as our other turbines. With average fuel consumption of only 2 oz. per minute gives flight times of 9 minutes plus gear pass, approach and landing with only 20oz of fuel on board.

The Flea will fly a 9 lb RTF model very nicely.

Thanks for your interest,

Rob.

RE: Jet Central Flea??
 

Are there any decent ARF that can use it?

RE: Jet Central Flea??
 

Mark:

My colleague in the UK has provided excellent information about our newest turbine. . .the "Flea."

The Flea on display at our vendor tent during Florida Jets caused quite a stir. It was the most photographed turbine there!

The Flea is currently flying and continued R and D tests are being conducted. Not wanting to release prior to all testing with results to our satisfaction will be the key to the Flea's success.

Autostart will not be available. This will be air start using one of the small hand held blowers such as the Makita or Black and Decker (Home Depot) rechargeable units. No need to drag around a big air tank.

We ([email protected]) jetArtes Gulf Coast currently have four sold with a total of 10 signed up and waiting release information.

Edgar:
This is a simple one. . .the EDF world offers many, many airframes which adapt nicely. We are currently flying an all Balsa Delta wing. Soon to become airborne is Hobby Lobby's L-59. Your choices are many. . .their respective costs are quite low compared to other ARF's.

Last, all North American orders will be processed through jetArtes Gulf Coast. To get on the list, please email me @ [email protected].

Best regards to all,

Eric Clapp
Distributor
JetCentral Turbines
Mfg. of Artes Turbines

RE: Jet Central Flea??
 

Thanks Eric, I'm looking forward to flying this engine, possibly in something like this Eliminator 90 edf. There must be I think lots of suitable edf airframes.

Rob.

RE: Jet Central Flea??
 

I was eyeing the Jet Hanger EDF F4D which was built for a 69mm fan.

Mark

RE: Jet Central Flea??
 

Finally , a turbine small enough for that 100" 747. Can't wait till the R&D in finished.

RE: Jet Central Flea??
 

How does this turbine differ from the Mw-44 and Simjet 700 other than it is airstart only ?

RE: Jet Central Flea??
 

Sonnich, Looks like it is much smaller... therefore spins faster...

RE: Jet Central Flea??
 

It's about 4 onces lighter and 15 mm smaller in diameter.

Mark

RE: Jet Central Flea??
 

nice.

So when its smaller, its cheaper right :):D

What is the estimated price of it here in Europe ?

RE: Jet Central Flea??
 

Yes, it's an extreemly small/light engine. No estimate of price in Europe as yet but as with all Jet Central products it will be competitively priced.

Rob.

RE: Jet Central Flea??
 

After seeing this at FJ-06, I fell in love with it as well. I think this engine is perfect for any of the .45 size DF airframes out there as well as the newer EDF ones. I know that the entire JHh line would be a perfect fit for this as well as the JetMart USA Mig-15. I had one years ago with a K&B .45 / Turbax 1 and loved it. I actually have another kit sitting around and was going to do an EDF version but now.....;)

I think there is going to be a good market for this as long as the price is reasonable :D I can just see multiple engine airliners on the horizon..

Adil

RE: Jet Central Flea??
 

Someone has got to post some video links of "The Flea" on a test stand :D

RE: Jet Central Flea??
 

Or installed in the rapier.......

RE: Jet Central Flea??
 

how would this mod into a Byron A-4 DF.. too small. im not sure of weight. wont have until next week?
just wondering..
Tim

RE: Jet Central Flea??
 

This would be a fun turbine to put in the JHH EDF F-14 too.

Mark

RE: Jet Central Flea??
 

What is the attraction to the engine with the already proven wren 44 on the market? USD? 4 oz and 2 pounds less thrust don't seem enough for me if I were getting into a turbine this size. JMO. Please educate me.

Joe

RE: Jet Central Flea??
 

2 oz per min. fuel :D

RE: Jet Central Flea??
 

as comparted to how many oz/min consumed by the Wren. which is????????????? ( answer here)

Tim

RE: Jet Central Flea??
 

4.3 ozs/minute at 195,000RPM

RE: Jet Central Flea??
 

sweet [8D]

RE: Jet Central Flea??
 

under 1/2. means twice the flytime.. as little said SWEET> if i convert my DF i know where im looking... after i sell everything else to afford one..lol
Tim

RE: Jet Central Flea??
 

i have two frames for it
Kyoshos F-86
HOB f-86[8D]

RE: Jet Central Flea??
 

When will the turboprop version come out? I'm much more interested in turbo props than jets. :D