RE: Nitro models pusher Bobcat?
 

Ok ARG i understand next question is where 2 get 1 i cked tower didnt c them also do 1 need 1 for rudders

Thx

Jason

RE: Nitro models pusher Bobcat?
 

you won't need one for the rudders

RE: Nitro models pusher Bobcat?
 

mine took two weeks.

RE: Nitro models pusher Bobcat?
 

AGR413,

What radio did you use? If you have an extra channel you shouldn't need the reverser. Also, Hitec or Multiplex digitals can be reversed. Personally, I like using an extra channel so I can dial in the end points.

Mark M.

RE: Nitro models pusher Bobcat?
 

Airtronics VG 6000 its a 6 ch computer radio so should work ill have 2 read the manual again 2 c how it works

Thx again

Jason

RE: Nitro models pusher Bobcat?
 

Can someone running the OS 55 please advise what prop size they are using on the Bobcat. Any info would be appreciated!

RE: Nitro models pusher Bobcat?
 

http://www.horizonhobby.com/Products...ProdID=EXRA325

http://www.horizonhobby.com/Products...ProdID=EXRA320

http://www.emsjomar.com/SearchResult...Words=REVERSER

I personally like the bottom item on the last link, these are nicer reversers and have an integrated gain control.

MMallory,

I am using a JR XP662

Channels in use:

aileron (flapperons)
flap (flapperons)
elevator
rudder
throttle
gear-slaved to rudder for nose wheel

All six channels in use.

RE: Nitro models pusher Bobcat?
 

Mine lands fine without flaps. If I had six channels I would go with Throttle, Ailerons, Rudder, Elevator1, Elevator2, Steering. Or use a Y for the steering servo and keep the flaps. At the end of the day if your reverser has the correct end points it will be fine.

Mark

ps or, use this as an excuse to buy a new radio. That new Futaba 12 is looking really good.

RE: Nitro models pusher Bobcat?
 

I opt to use the flaperon channel because it allows me to adjust the end points on the ailerons seperately IMHO this is more critical. Having flaps is just a side benefit.

Its funny you mention the radio thing I think I am about to purchase a used 8 channel JR.

RE: Nitro models pusher Bobcat?
 

I asked in an earlier post if anyone was using flaperons i thought they would help with slowin plane down i think i will go that route with rverser for elevator and sorry about all the questions but how will i slave the nose gear or can i just y the nose gear and rudder or will i have 2 reverse that also iI think i have just about everything cleared up [on electronics]

Thx Again

Jason

RE: Nitro models pusher Bobcat?
 

Dragraces,

No problem, I think if you set up your steering like I modified the photo you can work around reversing the nose gear servo. Again the geometry is going to stink and you will probably have much more throw much faster one direction than the other but no servo fighting to deal with.

RE: Nitro models pusher Bobcat?
 

Actually, if you move the pushrod to the other side of the servo the geometry will be perfect. However, you will not be able to adjust the steering trim from the radio nor the sensitivity.


Mark M.

RE: Nitro models pusher Bobcat?
 

Thx Again guys I ordered my servos and my extensions monday from Tower should be here in a couple days hope 2 get started over weekend Im going to take my time with this thing I have plenty of planes to fly if we get some nice weather so no hurry I will be asking more questions as time goes by looks like i need 2 order 1 y reverser right away

Thx

Jason

RE: Nitro models pusher Bobcat?
 

Dooh! good catch I over thunk it!

RE: Nitro models pusher Bobcat?
 

Thanks Bob,
I think I will try the Spring Air as well. Seems like they are highly recommended. Also, if I use the Hobbico, I do not think I can take the wing off if need be unless I take the retracts apart because of the nose gear and the mains being tied to the retract servo. At least with the air you can use disconnects.

RE: Nitro models pusher Bobcat?
 

For people wondering on shipping time, I ordered a B-25 from Nitro Models on sunday afternoon and got it today. I received the tracking number monday am. Bob

RE: Nitro models pusher Bobcat?
 

Man that B25 looks sweeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeat !!






one plane at a time !!

RE: Nitro models pusher Bobcat?
 

yeah....but it aint a jet!!!

:D:D

RE: Nitro models pusher Bobcat?
 

I have just always loved the B-25 since I flew a full scale about 20 years ago. The quality looks very good. Manual is terrible, but has throws and cg location that looks right. Wish they would come out with a few more jets. Bob

RE: Nitro models pusher Bobcat?
 

What he said!

RE: Nitro models pusher Bobcat?
 

I ordered one of these last night. I have one of those Morris Rossi 60's, several TT 46 Pros and a couple TT 61 pros which for the weight increase really don't have that much more power. I have been looking at the Tower 75 as well. The Rossi is in an airplane, but it really is overpowered and because of that I don't fly it nearly as much as I would like to. I don't fly nearly as much as I'd like to period, which leads me to flying my SPADs more as they bounce better.

Should I move the Rossi or just buy the Tower 75. Not really interested in buying a $350 Jett though I have seen and love the work they do.

RE: Nitro models pusher Bobcat?
 

If you don't want to go quite so fast I would suggest moving the Rossi. Its really hard for us to know your mind and know whats best for you.

I will say from my experience so far I REALLY REALLY like the Tower .75, It has a distinct powerful sound and it is very powerful.

RE: Nitro models pusher Bobcat?
 

I'm a combat pilot and the proud owner of the RocketDawg.
Fast is good. I know at 127 mph the Bulldawg isn't exactly 'Fast' but at 30" for a wingspan it sure seems fast.

RE: Nitro models pusher Bobcat?
 

In that case buy the .75 :)

RE: Nitro models pusher Bobcat?
 

Ok guys have a question i bought HS-55s for elevator and rudder i can make them fit by adding blocks to screw them to and will get a nice flush mount , My questions is do these servos have enough tourqe at 15.7 oz i thought i read in an earlier post that someone used these just need 2 be sure

Thx

Jason