RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

NICE! Dude don't you own a Firebird and also a Wart hog and now a Viperjet!! You must be rollin'! [sm=greedy.gif]Please tell me what I need to do?:D My Wife thinks my one jet is to damn expensive....
[sm=75_75.gif]

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

Dude Billy has it going on sometimes his wife even comes to the field and helps hip put the planes together. He is the man.:D


Ron

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

You guys didn't know that Billy studied under Mace Windu, he is a master at that Jedi mind sh%t;)

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

The madien will be the day after it is complete. Not a day sooner;)

I know what your saying Ron. I put the 200 in my F-16 1/6 scale for vertical performance. The byproduct of this is I get better fuel economy. i fly here around at a click over half throttle most of the time, keeping full throttle reserved for pepper passes and vertical , got the timer set at 9 minutes and I still land with 30 or 40 ounces in the main tank.

However, I am looking forward to flying the Viperjet with the 160SX. I think it will be a very relaxing plane that one can enjoy on landing and can also drop the hammer and haul the mail.

Greenacre, Every plane has it's own attraction. The Firebird hauls ***** and looks mean, the Hog is down and dirty military scale flying at its best, The Skymaster F16 is crazy AOA, scale flight and sport flying,( probably the most all purpose plane I got) and the newly add Viperjet is gonna be my new kick back, have fun, go fast, knifedge for days, look good in the air , easy landing, all weather bird.

As for the wifes tolerance, well, that why I married her.............or maybe it was the rack!:D

Billy

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

CLASSIC!!:D

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

Dude, i got to the end of your post and nearly snorted my scotch!!! LOL

she got a sister? :D

get in there tiger, hope to see it, the SM Mig29, the viperjet etc at SW in Feb

good luck

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

When are you bringing her out to Buttonwillow ???

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

Whoaaaaaa, watch out for that one Billy!!! Keep the women away from Gordon!!!!

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

:D

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

the airplane?? or the sister? :D

crazy old kook.

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

any more build pics? It has been a day already.:D


Ron

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

Huh ? Airplane ? What airplane ? What are you talking about Buck ? ;)

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

Can I get an-OOOHHHHHHHHHHHHHHHHHHHHHHHH!

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

Mark,
What area of the jet would you modify for the larger turbines, beside vert stab and rudder, what else would you do. thanks

Joe C!!

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

Joe,

Couple of the things I found:

Very thin stab tube sleeves and not much glue holding them to fuse sides
Internal fin structure that was not glued
Some internal wing structure not glued
Holes for retaining stab screws VERY close to edges
Fin clamp that did not clamp properly

This kit is great value for money and very nicely made in general so I am not knocking it. All I was saying to Ron was that before I cranked open a 50lb P200 I'd sort the above if he had the same in his kit. Hell, I'll be sorting most of them for mine 160 powered version!

I was only trying to help - maybe I caught him on a bad day ;)

Cheers,
Mark

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

Mark,

I do get a bit jumpy from time to time sorry about that. We have had no issues with the kit other than landing gear retration. That problem was solved by adding more air bottles for volume. I will take it out sat and burn a little kero through the beast. By the way I do not fly around full stick all the time I only use the extra power for strait aways and verticals. There is no substitution for that extra power. Mark thanks for the help sorry for getting a little short.


Ron

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

Ron,

Big hugs!! (manly ones!!) :D :D

Let us know how it goes and post some pics/video!! Actually, whilst we're talking pics post a couple showing your install. I am in the middle of making/hiding equipment plates so I can get to everything without taking any of the cockpit out and without it looking crap!

Cheers,
Mark

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

Mark,
Thanks, I will have Henry go through the list you provided, Henry did notice some of your concerns already building Sung"s Viper, mine is also unpainted and will have Henry do what needs to be done no matter what engine size I decide to use. Mark will you be attending Florida Jets, hope to see you there, take care.

Joe C!!

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

Mark,

Will do.


Ron

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

I decided to put the elevators servos in the stabs. I saw a picture that showed the servos mounted to the fuse side for the elevators but putting them in the stab seemed like it would work just fine.

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

with the servo intalled

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

Billy

Looking good!


Ron

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

Got some wood dowels to epoxy into the carbon tubes for the stabs. I don't think it really needs it, but it doesn't weight much and worth the extra strength. A little extra piece of mind when she's hammer down;)

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

Got the rudder servo installed. Pretty much the same way as the stabs but with an 8711. I cut two blocks out of 3/4" ply( sort of like the ones supplied in the kit) Screwed them to the servo then shaped the wood to fit inside the vertical. It is also up against the vertical spar inside for extra strength.

RE: SKYMASTER VIPERJET ASSEMBLE THREAD
 

Just checked on those carbon stabs, man they are rock solid now.

Next I made the supports for the fuel tanks. We don't need those things bouncing around inside there;).

Made a couple brackets out of plywood. After the glue dries they can be removed with four screws.