|
RE: JR Radio Issue - Elevators on two different channels
ORIGINAL: Greg Wright sincityjets, what i have found is that if you don't have all the aux channel nobes and sliders centered before you inhibit them, that for some reason throws the centering of the servo off and they do not travel at the exact same rate. That's exactly what i said earlier. |
RE: JR Radio Issue - Elevators on two different channels
Is the resolution the same on each channel with the 12x I know its not on the older 10x or 10sx, could that be causing the problem? I had a like problem on my 10sx but that is also 72mhz but did not go away when converted to 2.4
|
RE: JR Radio Issue - Elevators on two different channels
Kelly, yes all 12 channels are on the same resolution.
|
| All times are GMT -8. The time now is 11:05 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.