RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Monster Trucks (https://www.rcuniverse.com/forum/rc-monster-trucks-160/)
-   -   Tips for Smartech Magic Wheel (https://www.rcuniverse.com/forum/rc-monster-trucks-160/2552577-tips-smartech-magic-wheel.html)

hardtech 01-17-2005 09:54 PM

Tips for Smartech Magic Wheel
 
Here is some tips for the owners of the Smartech Magic Wheel. I just want to share what I've done to my car to make it better.

First of all, everybody that has a primer on the tank should remove it. Sometimes that cause air leak and gas stop entering in the carburator. What you see in black is some high temp silicone. I put a screw in the hole.

http://img25.exs.cx/img25/2841/smart...cwheel17yw.jpg

Have you noticed some oil near the header or the engine mount? This is caused by a bad design of the header. The hole in the header is too big for the gasket and after some runs, the gasket disapear and oil begin to leak.

http://img25.exs.cx/img25/5372/smart...heel0283gm.jpg

I buyed on ebay an aluminum exhaust header from HPI (86037). That fit perfect.

http://img25.exs.cx/img25/3250/smart...heel0156ij.jpg

If you find that the suspension on the magic wheel is too soft, you can adjust them with o-ring avaible for the T-Maxx.
But you can adjust the suspension with big straw (is that the right word? I speak french so I'm not sure...) comming from slush that you cut the size you want.

http://img109.exs.cx/img109/205/smar...heel0173rg.jpg

From factory, the full throttle on my controller was not full throttle on my carburator. You can adjust this by putting the linkage in the hole below the other one on the carburator and adjusting the linkage near the servo. Do some test to be sure that the throttle and the break are perfectly adjusted.

http://img122.exs.cx/img122/5169/sma...heel0224jk.jpg
http://img122.exs.cx/img122/299/smar...heel0237tv.jpg

Finally, just in case that you did not know, T-Maxx and Savage body will fit on the Magic Wheel. I destroyed my stock body in the snow and ice. I buyed a savage body to replace it.

http://img48.exs.cx/img48/5572/smart...heel0262lq.jpg

Don't forget to seal the backplate with some silicone to be sure there is no leak.

I hope this will help some people that purchased magic wheel or any smartech nitro car. Remember that allmost every parts from old .15 T-Maxx will fit the Magic Wheel. It seems that some HPI parts fit too!

ScMc 01-17-2005 10:05 PM

RE: Tips for Smartech Magic Wheel
 
Thanks for posting those helpful tips! Looks like you're having fun with your truck.[8D]

Kemo 01-17-2005 10:18 PM

RE: Tips for Smartech Magic Wheel
 
After this much work, it must be a truck worth having eh? That engine design isnt all that great though.

hardtech 01-17-2005 10:29 PM

RE: Tips for Smartech Magic Wheel
 
This much work... comming from an "engine rebuilder" that sounds funny.:D
Yes it worth cause it's half the price of t-maxx.
And do you really know what engine is that? An engine rebuilder should know that;)

jaymagic 01-29-2005 10:26 AM

RE: Tips for Smartech Magic Wheel
 
ALSO MELTED THE CLUTCH ...TRAXXAS 4146 (CLUTCH WITH SPRING) REPLACMENT,
MY R/C SHOP HEATED UP THE BELL HOUSEING AND REMOVED THE MELTED OLD ONE
SAVEED ME BUYING AN OTHER ONE.BODY TOTAL SPLIT AND CRACKED TO BITS ,GLUE AND PATCHED UP
FOR NOW(THEY ARE FAR TO THIN AND CRACK EASLY)
JAY

crazytrack 02-01-2005 06:50 PM

RE: Tips for Smartech Magic Wheel
 
I noticed that one guy on this site is selling magic wheels. Can anyone give me some overall evaluation of this truck? Is it good to start with? The guy mentioned a website www.rseetoys.com seems only sell startech products. Has anybody ordered anything from there? Do they have good credit? Please give your generous opinions. I'm looking to buy a rc monster truck. Thanks!!

N4sir 02-01-2005 10:43 PM

RE: Tips for Smartech Magic Wheel
 
The Smartech Magic Wheel, as well as their other r/c's, are imported from Taiwan. You may notice that the Magic Wheel is remarkably like the T-Maxx. Some people claim that it's an illegal copy. In fact most of the parts from a T-Maxx fit. The motor is a Taiwan .15CX with pullstart and the chasis is 2mm alluminum, thinner than T-Maxx. It is a 2-speed forward only. The MW is marketed as a 1/8 scale MT, however it's the same size as the maxx. The top speed is allegedly 38MPH. Smartech is an importer and is part of the Perfect International Group and the Toyhouse Manufacturing Corporation (in Taiwan with branch offices in Shanghai. Beijing, Thailand, U.S.A, and a production facility in China).

Hardtech, I don't mean to be knocking your MT. Just have fun with it.

tndiverdown 02-02-2005 12:25 AM

RE: Tips for Smartech Magic Wheel
 
The magic wheel is obviously a illegal copy of the T-maxx. My advice would be to stay away from the chepo taiwan copies and get the real thing.

jaymagic 02-03-2005 04:58 PM

RE: Tips for Smartech Magic Wheel
 
ITS BLINDING FUN 1/2 THE PRICE OF A T-MAXX
GET ONE NOW!!!!!!! AND THE SPARES ARE T-MAXX
IF YOU DON'T THROW IT OFF CLIFFS LIKE MOST OFF THE YANKS DO.

supernova803 02-03-2005 06:15 PM

RE: Tips for Smartech Magic Wheel
 
rccar411 seems to flame some one in every post he enters.

johnxbox 02-05-2005 03:19 PM

RE: Tips for Smartech Magic Wheel
 
whats the point of coming into a thread which is obviously intended for magic wheel owners and slagging the truck off? you should mind your *****n business!! maybee some of the ppl on this forum are just pisse*d that they paid top dollar for something they could have had half price.....the rest it seems are just spoilt american kids with to much disposable income...... "MOM AND DAD". and plus, you arab killers seem to pay alot less for EVERYTHING!!!!!!!!!!!!!!!!!

supernova803 02-05-2005 10:38 PM

RE: Tips for Smartech Magic Wheel
 
DAAAAAAAAAAAAANG! That hurts:(

ICrashThings 02-05-2005 10:47 PM

RE: Tips for Smartech Magic Wheel
 

ORIGINAL: johnxbox

the rest it seems are just spoilt american kids with to much disposable income...... "MOM AND DAD". and plus, you arab killers seem to pay alot less for EVERYTHING!!!!!!!!!!!!!!!!!
If you think about, When you make fun of america, you make fun of every other country. All we are is just a bunch of immigrants from around the world. And if you do not like our ways, sorry...Not our fault, we are just more interesting then your country. [&:]

supernova803 02-05-2005 10:58 PM

RE: Tips for Smartech Magic Wheel
 

spoilt american kids with to much disposable income...... "MOM AND DAD"
I have to pay for everything. I'm only 14 and don't have a full time job so I worked so freekin long to get enough money to buy all my junk(see below). Actually, i worked for 6 hours today at my grandmas house to buy some parts.[:'(]

Pinolelst 02-05-2005 11:00 PM

RE: Tips for Smartech Magic Wheel
 

ORIGINAL: johnxbox

and plus, you arab killers

That's uncalled for friend.Not every American supports what's going on just as you apparently don't stand behind that Blair fellow that's in charge over there .....[:@]

ICrashThings 02-05-2005 11:03 PM

RE: Tips for Smartech Magic Wheel
 

ORIGINAL: Pinolelst


ORIGINAL: johnxbox

and plus, you arab killers

That's uncalled for friend.Not every American supports what's going on just as you apparently don't stand behind that Blair fellow that's in charge over there .....[:@]
Hence why we have hippies...[&:]

N4sir 02-06-2005 12:16 AM

RE: Tips for Smartech Magic Wheel
 
Dear Lord JohnXbox,

How do I loath thee? Let me count the ways. I do not dislike the UK, in fact, I appreciate the support that our countries have been able to share since WWI. If I did have any dislike for your homeland, I surely would not post my ignorant political opinions on an r/c forum. So, please find a pleasant little X-Box forum to go to and stay over there. Are you minding your own "*****n business"? If you have come to flame others in a battle of wits, you have obviously come unarmed.

bamaracer0 02-06-2005 01:11 AM

RE: Tips for Smartech Magic Wheel
 

ORIGINAL: johnxbox

whats the point of coming into a thread which is obviously intended for magic wheel owners and slagging the truck off? you should mind your *****n business!! maybee some of the ppl on this forum are just pisse*d that they paid top dollar for something they could have had half price.....the rest it seems are just spoilt american kids with to much disposable income...... "MOM AND DAD". and plus, you arab killers seem to pay alot less for EVERYTHING!!!!!!!!!!!!!!!!!
I'm sorry you feel that way. I actually sold a paintball marker, and was forced to get out of the sport of paintball, just because I wanted a Revo. The "arab killer" comment went way off the deep end.

jaymagic 02-13-2005 02:17 PM

RE: Tips for Smartech Magic Wheel
 
oh dear snapped the magic wheel in half..
t-maxx ordered bits ...bulkhead left &right and front skid plate.. [&o]

DarkSavageX 02-13-2005 02:19 PM

RE: Tips for Smartech Magic Wheel
 
how old is the wheel?

neil.jb 02-13-2005 03:04 PM

RE: Tips for Smartech Magic Wheel
 

ORIGINAL: DarkSavageX

how old is the wheel?
about 8000 years AFAIK ;)

http://www.zyworld.com/Assyrian/Inve...he%20wheel.htm

DarkSavageX 02-13-2005 03:19 PM

RE: Tips for Smartech Magic Wheel
 
ha i ment the magic wheel:eek:

USABaja5B 02-13-2005 11:16 PM

RE: Tips for Smartech Magic Wheel
 
Thats great your having fun with the Magic Wheel. At least you have something, instead of just saving up for years to buy a T-Maxx. Once things break, buy RPM or certain aluminum bits to make it stronger.

Smokinjoe6450 02-14-2005 07:41 AM

RE: Tips for Smartech Magic Wheel
 
Why do people keep coming on here saying it is an "illegal copy of the T-Maxx"????? If it was illegal, don't you think Traxxas would have done something over the years about it??!! Traxxas probably sold them the rights to make their older version t-maxx. What do they care...they are now "double dipping" with the new AND old stuff. [&:]

jaymagic 02-14-2005 01:32 PM

RE: Tips for Smartech Magic Wheel
 
darksavage. i've had mine only since 1st jan ,probably had a hair line crack i had'nt notice from a fence post
incident before this one with the pallett..the magic is about a year on the market after t-maxx sold the plans..
£12 to repair in plastic or £134 for ali stuff...doo.
sod the hop ups.:eek:


All times are GMT -8. The time now is 04:58 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.