engine problem
03-14-2004 | 10:26 AM
#1
Thread Starter
Senior Member
Joined: Mar 2004
Posts: 2,752
Likes: 0
Received 0 Likes
on
0 Posts
From: Harvey,
LA
engine problem
i have had a Nitro Rustler for 2 years, with a pro.15 in it. i never had problems until i, i moved to a different state. for some reason when ever i try to start it the engine will start backwards. i have to restart it like 4times to get to go forwards. can anybody help me
03-14-2004 | 10:28 AM
#2
RE: engine problem
on my RC controller i have a little switch that says "rev" for reverse...does your controller have the same thing? if it does switch it to the other side...thats the only thing i can think of doing...
03-14-2004 | 01:40 PM
#3
Senior Member
Joined: Dec 2003
Posts: 2,075
Likes: 0
Received 0 Likes
on
0 Posts
From: defiance, OH
RE: engine problem
ORIGINAL: ICrashThings
on my RC controller i have a little switch that says "rev" for reverse...does your controller have the same thing? if it does switch it to the other side...thats the only thing i can think of doing...
on my RC controller i have a little switch that says "rev" for reverse...does your controller have the same thing? if it does switch it to the other side...thats the only thing i can think of doing...
rustler: how do you start your truck?
03-14-2004 | 02:23 PM
#4
Senior Member
Joined: Sep 2003
Posts: 615
Likes: 0
Received 0 Likes
on
0 Posts
From: alkhobar, SAUDI ARABIA
RE: engine problem
think u busted the thing called the (one way clucth set) and (starting axle) it happend to me once but dont start it oftenly coz it will damage ur engine.
03-14-2004 | 07:57 PM
#5
Thread Starter
Senior Member
Joined: Mar 2004
Posts: 2,752
Likes: 0
Received 0 Likes
on
0 Posts
From: Harvey,
LA
RE: engine problem
how i start it is, first i take the plug out flip the car over and spin the engine over to get after run oil out. then i put the plug back in with the washer, then i pump fuel into the carb and put the glow plug heater on. then i just pull the pull start and if it dont start i put my ginger on the exhaust tip
03-14-2004 | 08:54 PM
#6
Senior Member
Joined: Dec 2003
Posts: 2,075
Likes: 0
Received 0 Likes
on
0 Posts
From: defiance, OH
RE: engine problem
ORIGINAL: Rustlerraceer
how i start it is, first i take the plug out flip the car over and spin the engine over to get after run oil out. then i put the plug back in with the washer, then i pump fuel into the carb and put the glow plug heater on. then i just pull the pull start and if it dont start i put my ginger on the exhaust tip
how i start it is, first i take the plug out flip the car over and spin the engine over to get after run oil out. then i put the plug back in with the washer, then i pump fuel into the carb and put the glow plug heater on. then i just pull the pull start and if it dont start i put my ginger on the exhaust tip
03-14-2004 | 09:32 PM
#7
Thread Starter
Senior Member
Joined: Mar 2004
Posts: 2,752
Likes: 0
Received 0 Likes
on
0 Posts
From: Harvey,
LA
RE: engine problem
no, i doesnt have reverse, the last time i ran the truck was about 2 weeks ago was the last time i took the pull start of cuz the one-way bearing was slipping because it got oil into it
03-14-2004 | 09:37 PM
#8
Senior Member
Joined: Dec 2003
Posts: 2,075
Likes: 0
Received 0 Likes
on
0 Posts
From: defiance, OH
RE: engine problem
ORIGINAL: Rustlerraceer
no, i doesnt have reverse, the last time i ran the truck was about 2 weeks ago was the last time i took the pull start of cuz the one-way bearing was slipping because it got oil into it
no, i doesnt have reverse, the last time i ran the truck was about 2 weeks ago was the last time i took the pull start of cuz the one-way bearing was slipping because it got oil into it
03-16-2004 | 11:38 AM
#9
Junior Member
Joined: Jan 2004
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
From: powhatan, VA
RE: engine problem
if it has a electric starter it couldnt be that u instaled the pos into the neg i own a rustler also but it never happend to me so i might be right.
03-16-2004 | 04:04 PM
#11
Thread Starter
Senior Member
Joined: Mar 2004
Posts: 2,752
Likes: 0
Received 0 Likes
on
0 Posts
From: Harvey,
LA
RE: engine problem
i took my one way bearing of it seams fine. i cleaned it, then i started the truck runs fine. gues sometine else.happens again,i will just get a new one way bearing
