first full on racing experiance with jato
#1
Senior Member
Thread Starter
My Feedback: (-1)
Join Date: May 2003
Location: troy,
KS
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
first full on racing experiance with jato
i know people are tired of the jato threads but i'm sorry...i love them
today and St. Joseph Missouri Awsome Toys and Hobbies had a can food race day in the parking lot. It was great. There was so many vehicles there and everyone was great but anyways. to the point.
i was in the fourth race of the day against a couple other jato's and another st i'm not shure what it was but i think it was a rc18gt but not positive. The point of the races were to see who got the most laps in each race then were split to a main and b main by how many laps you completed. Usually they run 5 minute races but today for the huge amount of people who showed up they only ran 4 minutes. One guy told me last month the most laps was 35 laps in 5 minutes and i pulled off 31.5 laps in a 4 minute race but i ran out of gas at about 3 so i feel i coulda beat the record from last month but i need to figure something out for gas consumption. I feel the jato should be more well respected then it is. Its a great truck and just wanted to tell everyone my experiance with it and that i'm very impressed. I didn't get to compete in the last races because i broke a turn buckle. Kinda sucked. It happened after ramping about 10 feet during intermission and then got hit by a savage and the lhs didn't have one for me to buy so i was done. it was about 80 degrees with little humidity and was running speed hawgs and 5 cell pack and everything else stock except some badhorsie boots heres some pics if you are interested i ordered the red alum turnbuckles and i'm annoing them blue to match everything else also ordered sway bars to.
http://community.webshots.com/user/supersly_jones just go to the jato folder...also if your interested in the t-maxx or any of the nascar stuff let me know..lol
today and St. Joseph Missouri Awsome Toys and Hobbies had a can food race day in the parking lot. It was great. There was so many vehicles there and everyone was great but anyways. to the point.
i was in the fourth race of the day against a couple other jato's and another st i'm not shure what it was but i think it was a rc18gt but not positive. The point of the races were to see who got the most laps in each race then were split to a main and b main by how many laps you completed. Usually they run 5 minute races but today for the huge amount of people who showed up they only ran 4 minutes. One guy told me last month the most laps was 35 laps in 5 minutes and i pulled off 31.5 laps in a 4 minute race but i ran out of gas at about 3 so i feel i coulda beat the record from last month but i need to figure something out for gas consumption. I feel the jato should be more well respected then it is. Its a great truck and just wanted to tell everyone my experiance with it and that i'm very impressed. I didn't get to compete in the last races because i broke a turn buckle. Kinda sucked. It happened after ramping about 10 feet during intermission and then got hit by a savage and the lhs didn't have one for me to buy so i was done. it was about 80 degrees with little humidity and was running speed hawgs and 5 cell pack and everything else stock except some badhorsie boots heres some pics if you are interested i ordered the red alum turnbuckles and i'm annoing them blue to match everything else also ordered sway bars to.
http://community.webshots.com/user/supersly_jones just go to the jato folder...also if your interested in the t-maxx or any of the nascar stuff let me know..lol
#2
Senior Member
Join Date: Nov 2004
Location: Naperville,
IL
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
RE: first full on racing experiance with jato
Sounds like you really like your Jato. I know what you mean about all the AJto threads but everyone like to tell everyone else about their new car. I was kinda the same way when I first got my evader. Thought I was the coolest kid ever with my r/c car but I realized that tons of other people had them and I just kinda became another R/C enthuiast. Great Hobby this is.
Rob
Rob
#3
Senior Member
Thread Starter
My Feedback: (-1)
Join Date: May 2003
Location: troy,
KS
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
RE: first full on racing experiance with jato
well this deff isn't my first one....first vehicle i would ever comment on having was a radio shack flashtron it was cool in like fifth grade lol...then i bought a airplane...then a t-maxx...then emaxx....then evader st....then 4-tec....then xray m-18 and now the jato and the jato is by far my fav...its so cool and strong...and especialy fast...its just wierdpeople complain about it having to much power and not being able to get traction...i got more then i could ever need so idk....driver maybe....
#4
Senior Member
Join Date: Jan 2004
Location: Abingdon,
MD
Posts: 6,382
Likes: 0
Received 0 Likes
on
0 Posts
RE: first full on racing experiance with jato
ORIGINAL: supersly_jones
i was in the fourth race of the day against a couple other jato's and another st i'm not shure what it was but i think it was a rc18gt but not positive.
i was in the fourth race of the day against a couple other jato's and another st i'm not shure what it was but i think it was a rc18gt but not positive.
#7
Senior Member
Join Date: Nov 2004
Location: south,
FL
Posts: 634
Likes: 0
Received 0 Likes
on
0 Posts
RE: first full on racing experiance with jato
Sounds awsome man, wish I had something like that going around here.
On another note: STAY AWAY FROM THE RED TURNBUCKLES!!!!!!!!! If you thought your stock turnbuckle broke easily wait till you snap a red turnbuckle. They are over-prices peices of crap. I was warned but didnt listen so dont make the same mistake. Get lunsford titaniums around the same price, and 5x stronger. They are also lighter than the stocks. I know the red buckles are pretty but heed my advice. I have replaced the red turnbuckles on my car as they snap and I only have 3 left the rest are titanium and havent even bent a little.
Have fun!!
On another note: STAY AWAY FROM THE RED TURNBUCKLES!!!!!!!!! If you thought your stock turnbuckle broke easily wait till you snap a red turnbuckle. They are over-prices peices of crap. I was warned but didnt listen so dont make the same mistake. Get lunsford titaniums around the same price, and 5x stronger. They are also lighter than the stocks. I know the red buckles are pretty but heed my advice. I have replaced the red turnbuckles on my car as they snap and I only have 3 left the rest are titanium and havent even bent a little.
Have fun!!
#9
Senior Member
Join Date: Jan 2004
Location: Abingdon,
MD
Posts: 6,382
Likes: 0
Received 0 Likes
on
0 Posts
RE: first full on racing experiance with jato
ORIGINAL: evaderstman
On a side note about the tunbuckles lunsfords also have a life time warrenty.
On a side note about the tunbuckles lunsfords also have a life time warrenty.
#10
Junior Member
Join Date: Jun 2005
Location: Cincinnati, OH
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: first full on racing experiance with jato
Sounds cool! I just got one a few days ago and finally was able to break it in today. This thing is definitely sweet! I can't wait to do some racing with it.
#12
Senior Member
Thread Starter
My Feedback: (-1)
Join Date: May 2003
Location: troy,
KS
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
RE: first full on racing experiance with jato
i found these...a cheaper alternative to lunsfords?
http://cgi.ebay.com/ws/eBayISAPI.dll...MakeTrack=true
http://cgi.ebay.com/ws/eBayISAPI.dll...MakeTrack=true
they are 3racing so they are prettty good and they accept 3mm ball ends...they haven't emailed me back about shipping yet though
http://cgi.ebay.com/ws/eBayISAPI.dll...MakeTrack=true
http://cgi.ebay.com/ws/eBayISAPI.dll...MakeTrack=true
they are 3racing so they are prettty good and they accept 3mm ball ends...they haven't emailed me back about shipping yet though
#13
Senior Member
Join Date: Nov 2004
Location: south,
FL
Posts: 634
Likes: 0
Received 0 Likes
on
0 Posts
RE: first full on racing experiance with jato
ORIGINAL: supersly_jones
i found these...a cheaper alternative to lunsfords?
http://cgi.ebay.com/ws/eBayISAPI.dll...MakeTrack=true
http://cgi.ebay.com/ws/eBayISAPI.dll...MakeTrack=true
they are 3racing so they are prettty good and they accept 3mm ball ends...they haven't emailed me back about shipping yet though
i found these...a cheaper alternative to lunsfords?
http://cgi.ebay.com/ws/eBayISAPI.dll...MakeTrack=true
http://cgi.ebay.com/ws/eBayISAPI.dll...MakeTrack=true
they are 3racing so they are prettty good and they accept 3mm ball ends...they haven't emailed me back about shipping yet though
Ive bought some 3racing products from hong kong off ebay and the shipping was CHEAP. Products were great. At that price how can you go wrong.
It says $4 S&H all other countries
Thanks for the link. I just bought a set for the rear. So now I will have lunsfords on the front with red alum. for the steering and 3racing titaniums on the rear.
#14
Senior Member
Thread Starter
My Feedback: (-1)
Join Date: May 2003
Location: troy,
KS
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
RE: first full on racing experiance with jato
yeah thanx you took the last ones he had....thanx a lot...jerk....lol....jk...i emailed him to get all of them....lol
#15
Senior Member
Join Date: Nov 2004
Location: south,
FL
Posts: 634
Likes: 0
Received 0 Likes
on
0 Posts
RE: first full on racing experiance with jato
ORIGINAL: supersly_jones
yeah thanx you took the last ones he had....thanx a lot...jerk....lol....jk...i emailed him to get all of them....lol
yeah thanx you took the last ones he had....thanx a lot...jerk....lol....jk...i emailed him to get all of them....lol
Haaaa. Yes I am Sp1intercell.
#16
Senior Member
Thread Starter
My Feedback: (-1)
Join Date: May 2003
Location: troy,
KS
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
RE: first full on racing experiance with jato
hey tricksligger or should i call you splintercell haha....you never told me how that 3racing head is...working good for ya?
#17
Senior Member
Join Date: Nov 2004
Location: south,
FL
Posts: 634
Likes: 0
Received 0 Likes
on
0 Posts
RE: first full on racing experiance with jato
ORIGINAL: supersly_jones
hey tricksligger or should i call you splintercell haha....you never told me how that 3racing head is...working good for ya?
hey tricksligger or should i call you splintercell haha....you never told me how that 3racing head is...working good for ya?
Great!!! It looks good and keeps the temps higher than the old one. Its running at about 230-240F.
#18
Senior Member
Thread Starter
My Feedback: (-1)
Join Date: May 2003
Location: troy,
KS
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
RE: first full on racing experiance with jato
wasn't the point keeping the temp down?[&:]
sorry i didn't elaborate...mine runs at around 235 in 100 degree weather and i thought it was a little high guess not
sorry i didn't elaborate...mine runs at around 235 in 100 degree weather and i thought it was a little high guess not
#20
Senior Member
Join Date: Nov 2004
Location: south,
FL
Posts: 634
Likes: 0
Received 0 Likes
on
0 Posts
RE: first full on racing experiance with jato
ORIGINAL: supersly_jones
wasn't the point keeping the temp down?[&:]
wasn't the point keeping the temp down?[&:]
No, the old head I had (badhorsie performance head) wasnt allowing the truck to get over 200F which caused my sleeve and piston to go early. So I was trying to get the temps up without having to go back to the stock head.
ORIGINAL: supersly_jones
well alright i ended up getting 3 sets of the 58mm's and 3 sets of the 61mm so i should be good for a long time lol
well alright i ended up getting 3 sets of the 58mm's and 3 sets of the 61mm so i should be good for a long time lol
See thats the thing with buying lunsfords....(lifetime warranty) No need to buy more than one extra.
#21
Senior Member
Thread Starter
My Feedback: (-1)
Join Date: May 2003
Location: troy,
KS
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
RE: first full on racing experiance with jato
well i got extra to give/sell to the guys at the next meet..i figured if i was ordering some anyways just get some extras for trades for parts or something....also so if one does break i don't have to wait for the new one to come in