repinching sleeves
01-16-2008 | 10:23 AM
#2
Senior Member
Joined: May 2004
Posts: 1,028
Likes: 0
Received 0 Likes
on
0 Posts
From: Pennock,
MN
RE: repinching sleeves
I have tried it before...
I didn't have the actual tool to do it with, I just used a hose clamp and a torch. I screwed it up BIG time[&o].
It is a solid theory, and I don't doubt that it would work....But I didn't do it right.
I run a relatively inexpensive engine, so it doesn't really pay for me to mess around.
I didn't have the actual tool to do it with, I just used a hose clamp and a torch. I screwed it up BIG time[&o].
It is a solid theory, and I don't doubt that it would work....But I didn't do it right.
I run a relatively inexpensive engine, so it doesn't really pay for me to mess around.
01-16-2008 | 10:25 PM
#4
Joined: Mar 2007
Posts: 3,671
Likes: 0
Received 0 Likes
on
0 Posts
From: Sarasota, FL
RE: repinching sleeves
this is who dose it on ebay. http://cgi.ebay.com/ws/eBayISAPI.dll..._promot_widget
i have personal used that person and it worked. Though the engien i did it on i have yet to really run alot but it dose work and saves a lot of money.
i have personal used that person and it worked. Though the engien i did it on i have yet to really run alot but it dose work and saves a lot of money.
