Hi there I have a HPI MT2 nitro car and i cant seem to get it started. Ive checked all the usual things you would check and i was just wondering is there anything else that i could look to see if it is working properly?
Thanks.

this is from the manual:


Possible Problem
out of fuel
Contaminated fuel
Glow plug is bad
No fuel flow
Engine flooded
Engine has overheated
Throttle valve isn't adjusted properly
Air cleaner is blocked

thanks. I hadnt thought to look in the manual ill have to check and see if there is any of those problems. Thanks again.

yeah the manual can tell you all sorts of thing about your cars!!lol!

when you put fuel into the tank you have to "pump" it into the engine carburetor. its in the manual on how to do it if you have a roto start or pullstart

yeah i always do that. I got it going today anyway. thanks for your help

ma-drummer25- great to hear you got it running. now go out an run it like theres no tomorrow.

cheers. But ive got another problem now it just revs load and doesnt move anywhere but i think its got somthing to do with the gearing.

on that one i would check your slipper clutch, and see if it needs to be tightened.

thats exactly what i was thinking im gonna check that later.