Help me identify this switch/reg
04-19-2011 | 12:35 PM
#1
Thread Starter
Senior Member
Help me identify this switch/reg
I'm replacing this switch/reg with a dual redundant system but would still like to know what this one is. I may use it in another sport plane but I know nothing about it. Was in used Temptation I bought
Any help would be great
Any help would be great
04-19-2011 | 02:54 PM
#2
Joined: Apr 2005
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
From: Cedar Falls,
IA
RE: Help me identify this switch/reg
It is a Mpi Miracle Switch. p/n ACC407. I just purchased one at a hobby shop.
It is a 'fail safe' design with a built in 6V regulator that can draw up to 0.05ma when turned off. Mpi recommends that you disconnect the battery if you plan to let your model sit for more than 30 days.
The current version has a fancier case. [link=http://www.maxxprod.com/mpi/mpi-21.html#Miracle%20Switch]Miracle Switch[/link]
Stan
It is a 'fail safe' design with a built in 6V regulator that can draw up to 0.05ma when turned off. Mpi recommends that you disconnect the battery if you plan to let your model sit for more than 30 days.
The current version has a fancier case. [link=http://www.maxxprod.com/mpi/mpi-21.html#Miracle%20Switch]Miracle Switch[/link]
Stan
