Retract Servo
10-28-2005 | 10:46 AM
#3
My Feedback: (2)
Joined: Jan 2002
Posts: 630
Likes: 0
Received 0 Likes
on
0 Posts
From: Ossining,
NY
RE: Retract Servo
If you are using a current recevier that has the Z plug it will be fine. You may have to trim the little tab off the servo like the JR guys do. If you have an old style reciever the plug won't fit and the wiring is different. Then you will need the adapter.
10-28-2005 | 12:08 PM
#4
RE: Retract Servo
Thanks, Anthony.
I have the new style Z receiver, the setup is RD8000 which is their newer 8 channel system. I just have not seen a retract servo for the Airtronics, or at least one that is advertized as a low profile retract servo with 180 degree movement.
DS.
I have the new style Z receiver, the setup is RD8000 which is their newer 8 channel system. I just have not seen a retract servo for the Airtronics, or at least one that is advertized as a low profile retract servo with 180 degree movement.
DS.
