Re: some info on the kit..
 

I have heard many complaints about the cost of these, and other Japanese kits, by people who have never seen or built one. But, everyone who has ever had a chance to actually put one together makes the same statement you have. You get what you pay for.

John

Mk Synergy 63 Kit
 

I am starting to think about electric after Jason Shulmans Rhapsody at the worlds. I thought this kit would be an ideal project that wouldn't break the bank. Has anyone any ideas on suitable motors etc.

Mk Synergy 63 Kit
 

So where do you get the landing gear and wheel pants from? What are the rest of you using? I didn't realize they were not included until last night.

Thanks!

Mk Synergy 63 Kit
 

It didn't come with the gear? Hmmm, sounds like they may have shorted you on your kit since they are clearly shown in the marketing photos. Does it appear that there is a model number of any kind next to the gear as depicted on the plan? I have two MK kits in my closet right now. Though both are intended for use with retracts, they both came with nice tail wheels. I would have thought a fixed gear model would come with the main gear.

You might want to check with the store you bought your kit from. If they don't have it, Hobby Net Japan has the MK Mighty Gear M Type (48-63) listed for $23.00. I think I would try to find out if the M Type is what's right for your kit before placing the order though. An email to Hobby Net Japan should get you an answer pretty quickly.

John

Mk Synergy 63 Kit
 

John,

I got it from Singapore Hobby, so I'll email Frederick and find out what the real deal is. I asked for the correct 270cc fuel tank, but he said nothing about needing gear and such.

Mk Synergy 63 Kit
 

Frederick is a really easy guy to deal with, but he only ships what you specifically order. I screwed up on my last order with him and he shipped exactly what I put on the sheet. Anyone need an MK vibration isolating beam type engine mount to go with their Synergy? I have two and only need one. :)

John

Mk Synergy 63 Kit
 

shaping the leading edge , very esay

Mk Synergy 63 Kit
 

shaping the leadine edge, because all the ribs are very accurate

Mk Synergy 63 Kit
 

the trailing edge, it is the only difficult part , because there small ribs , and it is very difficult to get the perfect alignement , the besr thing to to is to use the side and position it on the wing to get a perfect fit

Mk Synergy 63 Kit
 

hinging with the great plane slot machine

Mk Synergy 63 Kit
 

the size of the wing , i will shape the wing tips tomorow

Mk Synergy 63 Kit
 

the aileron are perfectly aligned, this kit is a joy to build

Mk Synergy 63 Kit
 

the landing gear the reference is mk 0247, it look made in carbon fiber

Mk Synergy 63 Kit
 

Hi JWN, I would be interested in that mount , is it for the YS63

Can anyone make a complete list of whats needed to finish the model? , ie landing gear,mount etc.

Mk Synergy 63 Kit
 

Sent you a PM.

John

Mk Synergy 63 Kit
 

to finish the mode you need :

the landing gear #mk 0247
the moto mount # mk 1311
the fuel tank # mk 0612
the tail wheel #mk 581
the wheel pant # mk 0252
the bb dual elevator coupler #mk 1231
a 57 mm spinner true turn or dubro
the ys fz63 engine
rudder horn .......

RE: Mk Synergy 63 Kit
 

shaping the wing tip[img][/img]

RE: Mk Synergy 63 Kit
 

construction of the stab

installation of the servo in the wing

RE: Mk Synergy 63 Kit
 

construction of the fuselage

RE: Mk Synergy 63 Kit
 

construction of the fuselage and the fuse jig

RE: Mk Synergy 63 Kit
 

fuse again

RE: Mk Synergy 63 Kit
 

engine insrallation and radio you can see the mk ball bearing elevator link

RE: Mk Synergy 63 Kit
 

the ball bearing elevator link il will really apreciate comments on this construction if anybody build this one

RE: Mk Synergy 63 Kit
 

Looking good! Makes me want to send an order to Singapore Hobbies. I'm personally not a fan of the elevator bell crank setups though they are smooth. Too many connections that could cause problems later on. Especially since one is not accessable after the model is built. I am interested in your fuse jig though. Care to enlighten the rest of us on it's construction?

Thanks!
John

RE: Mk Synergy 63 Kit
 

Hello guys. I'm new in the forum and i'm really glad to have found it.
Well here is my question: Is it a soft mount ? I cannot recognise it so well from the picture. Thanks in advance

Oliver