??... Not sure what you mean, Shawn. Bipes have been flown for some time.
And mine are not that far from the beaten path. I didn't think that fellows plane was either.

My wing design has been different for many years but that's it. Petrol, I suppose..... Hanson did a little of that a couple years before me. Of course now we have light and powerful petrol engines from several sources so it's so much simpler.

Hello

Maiden flights for new e-Harmonie I built for a friend. Motor Hacker Q80, battery Hacker 5000 mAh.
No mix rudder/elevator, no mix rudder/aileron.
Claude

http://www.rcuniverse.com/forum/atta...mentid=2169492http://www.rcuniverse.com/forum/atta...mentid=2169493http://www.rcuniverse.com/forum/atta...mentid=2169494http://www.rcuniverse.com/forum/atta...mentid=2169495http://www.rcuniverse.com/forum/atta...mentid=2169496http://www.rcuniverse.com/forum/atta...mentid=2169497http://www.rcuniverse.com/forum/atta...mentid=2169498http://www.rcuniverse.com/forum/atta...mentid=2169499http://www.rcuniverse.com/forum/atta...mentid=2169500http://www.rcuniverse.com/forum/atta...mentid=2169501http://www.rcuniverse.com/forum/atta...mentid=2169502http://www.rcuniverse.com/forum/atta...mentid=2169503

Another Extreme Flight Vanquish V2
http://www.rcuniverse.com/forum/atta...mentid=2169545http://www.rcuniverse.com/forum/atta...mentid=2169546
Hacker A60-7S V2. Gens Ace 90A HV ESC. 20x13 apc prop.

Made by Jaroslav Mach. He called M14. When I asked him why M14 he responded you pick a name. Since JM is such a good builder I decided to called Daedalus. However, I mixed with Spanish so called Dedalus. [ATTACH]2170639[/IMG]http://www.rcuniverse.com/forum/atta...mentid=2170640

[ATTACH]2170779[/IMG]

Probably boring but... I am very happy with it. :D

BJ Craft Episode with Pletty Advance 30-10, YGE90, 3 blade PT20x13, JR8411 rudder, 2xBLS153 elevator, 2x BLS171 (?) aileron. Extremely smooth flyer with the Advance and three blade.

Volkert

[ATTACH]2170780[/IMG]


EDIT: Struggling here! Cannot upload from my iPad....

Hi,
Galactika in use here.
/Bo
http://www.rcuniverse.com/forum/atta...mentid=2170871

My Caelus #1..... #2 with yellow instead of green is almost done...(back-up). [ATTACH]2170883[/IMG]

I was so lucky to get a hand on an Oxai Azurit last autum. After some rebuilding I was able to get maiden on monday :)

Here's a Summit 3 built by a good friend years ago as a back up plane.
Maidened ithttp://www.rcuniverse.com/forum/atta...mentid=2178298http://www.rcuniverse.com/forum/atta...mentid=2178299 last week.Ys61ar with hatori pipe,mechanical retracts.
Wish he was still here to see it fly

Here's an EU1A. This one is pretty heavy, but does fly okay with the NovaRossi Speed 13.http://www.rcuniverse.com/forum/atta...mentid=2193632

Hello

Friend of mine Alain did this plane with drawings of my design Harmonie.
Wings and stab are the sames.Only the fuse is different.
All in wood, engine is DLE 30. Maiden flight was done yesterday.
Claude

http://www.rcuniverse.com/forum/atta...mentid=2193741http://www.rcuniverse.com/forum/atta...mentid=2193742http://www.rcuniverse.com/forum/atta...mentid=2193743http://www.rcuniverse.com/forum/atta...mentid=2193744http://www.rcuniverse.com/forum/atta...mentid=2193745http://www.rcuniverse.com/forum/atta...mentid=2193746http://www.rcuniverse.com/forum/atta...mentid=2193747http://www.rcuniverse.com/forum/atta...mentid=2193748

My Xareltoo. http://www.rcuniverse.com/forum/atta...mentid=2194155

Here's my EU1A's first landing this year. This one came in pretty light, at 7-3/4#. First flights were with a YS Classic, but I've since changed to an OS Hanno Special.

http://www.rcuniverse.com/forum/atta...mentid=2194156

Hello

I built wings, stab and rudder for a Supreme which friend of mine got only fuselage.
Claude
http://www.rcuniverse.com/forum/atta...mentid=2199573http://www.rcuniverse.com/forum/atta...mentid=2199574http://www.rcuniverse.com/forum/atta...mentid=2199575http://www.rcuniverse.com/forum/atta...mentid=2199576http://www.rcuniverse.com/forum/atta...mentid=2199577http://www.rcuniverse.com/forum/atta...mentid=2199578http://www.rcuniverse.com/forum/atta...mentid=2199579http://www.rcuniverse.com/forum/atta...mentid=2199580http://www.rcuniverse.com/forum/atta...mentid=2199581http://www.rcuniverse.com/forum/atta...mentid=2199582http://www.rcuniverse.com/forum/atta...mentid=2199583 http://www.rcuniverse.com/forum/atta...mentid=2204146

Here's another of my EU1A getting ready for that Maiden voyage!
http://www.rcuniverse.com/forum/atta...mentid=2199584

Hello

I finished painting plane Harmonie of friend of mine.
Claude

http://www.rcuniverse.com/forum/atta...mentid=2208037http://www.rcuniverse.com/forum/atta...mentid=2208038http://www.rcuniverse.com/forum/atta...mentid=2208039http://www.rcuniverse.com/forum/atta...mentid=2208040http://www.rcuniverse.com/forum/atta...mentid=2208041

At my club's last swap meet I picked up this Hydeaway for a mere 60.00. After a covering and paint strip down I glassed the wings and stabs, made new ailerons, elevators and rudder then did a quick paint job. Had a little fun with the name. Power is AXI 5330 FAI, OS HC 1100 speed control and Falcon 19x13.5 three blade prop. I get through the advanced sequence without ever going past 2/3 throttle. Average current draw is 2700-2800 ma per sequence.

The get away looks very nice Shawn! I like the faded paint line.

Ken

Did you build the EU1 from a Eureka Aircraft kit or scratch?

That is an EU-1A which is a glass and foam kit. The Eureka version is the earlier EU-1.
RCAIIR and http://www.klasskotemo.com/patternplane.html both produce very nice gel-coated glass and foam versions of the EU-1A (probably lighter than the original by several ounces in the fuselage).

My latest build. Custom built up wings by Dave Snow. Adverrun contra

http://www.rcuniverse.com/forum/atta...mentid=2208672http://www.rcuniverse.com/forum/atta...mentid=2208673http://www.rcuniverse.com/forum/atta...mentid=2208674http://www.rcuniverse.com/forum/atta...mentid=2208675http://www.rcuniverse.com/forum/atta...mentid=2208676

Your EU-1A at 7 3/4# is quite a bit lighter than what others' weight at around 11 pounds. Do you have retracts on yours?

All these planes are stunningly beautiful. My pattern planes are quite "pedestrian" compared to what is shown here. I have a Great Planes Dirty Birdy ARF and an old kit-built Great Planes Ultra Sport 40. I could also stretch it a bit and claim my Great Planes Reactor 46 as a pattern plane since it was advertised as a sport/pattern/3D type. If you set the controls to low rates, it can be flown as a pattern plane.

Old broken nose Smaragd
 

A Smargard I picked up late last summer. It suffered from a very broken nose. All fixed up now and ready for engine testing and final CG check. I basically just matched the paint as best I could from the wing tube forward.

Ken

http://www.rcuniverse.com/forum/atta...mentid=2208891http://www.rcuniverse.com/forum/atta...mentid=2208892

Looks good Ken !!

Thanks! I plan on two pattern contests this summer. My first ever in June and a second in July. We'll see where it goes to from there.....

Ken