Hi Brian,

Is that Fumed Silica? It is very fine, extremely fluffy material. But I don't think it's a good filler that sands easily. I don't think it will do the job on the finish that you are looking for but I don't know for certain. I would test first.

I don't use microballoons in the finish either. Much too coarse and needs extra filling so paint can stick without pinholes or bubbles. I don't recommend it as a top coat. Great underlayment tho.

So that we are not accused of highjacking this thread, maybe we should this take this discussion to your other thread?? What do you think?

My two favorite NFL teams are the Seahawks and whomever is playing Denver. It was a very special Super Bowl! :D

http://www.rcuniverse.com/forum/atta...mentid=1986262http://www.rcuniverse.com/forum/atta...mentid=1986264my new Episode

I've been waiting a long time for this:

http://www.rcuniverse.com/forum/atta...mentid=1988552
Comp Arf Integral (NOS)
About 4780g RTF electric with carbon prop.
It flies nice :)

http://www.rcuniverse.com/forum/atta...mentid=1989093Arixtra #1 and 2. #3 is on her way as well!

http://www.rcuniverse.com/forum/atta...mentid=1989867

my krill spark
greetings from belgium

I promissed to keep you updated...
http://www.rcuniverse.com/forum/atta...mentid=1993737

Power gear is to be Dualsky motor + speed controller and Robbe batteries (10s 5000mA)

My new, still unflown, Phoenix 7...

http://www.rcuniverse.com/forum/atta...mentid=1993782http://www.rcuniverse.com/forum/atta...mentid=1993783

Hello

Serge did maiden flight with Harmonie I built for him.
Gas engine is RCGF32. Serge is very happy with and told me roll axis is very very good.
Claude

http://www.rcuniverse.com/forum/atta...mentid=2021522http://www.rcuniverse.com/forum/atta...mentid=2021523http://www.rcuniverse.com/forum/atta...mentid=2021524http://www.rcuniverse.com/forum/atta...mentid=2021525http://www.rcuniverse.com/forum/atta...mentid=2021526http://www.rcuniverse.com/forum/atta...mentid=2021527http://www.rcuniverse.com/forum/atta...mentid=2021528http://www.rcuniverse.com/forum/atta...mentid=2021529http://www.rcuniverse.com/forum/atta...mentid=2021530http://www.rcuniverse.com/forum/atta...mentid=2021531http://www.rcuniverse.com/forum/atta...mentid=2021532

Hi Papaone,
Beautiful workmanship - as usual! Is that a custom made header or is it commercially available? what type of soft mount system did you use?
Thanks,
Will

Hello Will

Thanks for your comment.

Header is Hatori 2301
http://www.hatori-models.co.jp/HP3/k...301.2551e.html

4 silentblocs M5 ref. ECF5 fixed on aluminium mount as shown on picture.
it is important to make chamfers (I dont know if the word is correct) to avoid the rubber cut.
http://shop.hpceurope.com/fr/produit...%C3%A9caniques

Claude

http://www.rcuniverse.com/forum/atta...mentid=2021571http://www.rcuniverse.com/forum/atta...mentid=2021572http://www.rcuniverse.com/forum/atta...mentid=2021573http://www.rcuniverse.com/forum/atta...mentid=2021574http://www.rcuniverse.com/forum/atta...mentid=2021580

Hi all stoner here, does anybody know where to buy a kit pattern plane either a 91 size or a 120 size ?

A kit, as in you actually build it? Current or dated airplane?
Tower will be releasing two ARFs this fall that are 'current' designs. Bryan Hebert has indicated that he will be producing a 110 sized version of his new Allure design (probably as an ARF and no idea when it will be available). BJ Craft has some very nice 110 sized ARFs which are available from F3A unlimited.
There are two kits of current designs: the Stage-90 by Fight Hobby which is a very nice Japanese laser cut kit (i am not sure they will ship direct to the USA) and the Europa Pro LT Mini by RC-Composit.com which is actually designed for Epower, but can easily be modified. They will sell/ship direct to the USA (Dave Lockhart has been reviewing the 2 meter composite version of the Europa Pro in his Flying Models' column). It is also a very nice laser-cut kit.
RCAiir produces a glass and foam kit of the Miss Beetle; a 90-120 sized airplane from the late '80s.
Pattern kits of any size are pretty rare these days!
-Will

Papaone, Is the Harmonie a kit or scratch built from plans? Where can I get a copy of the plans if they are available?
Thanks,
Will

Episodes in Ireland.

Hello Will

Harmonie is a scratch built from plan.
I can send you files if you give me your mail adress.
Claude

Arf airplanes are not kits, they never will be,i build all my own aircraft from kits only.they fly really nice mostly, well I guess its gonna be hard locating a pattern ship to build.I will keep you all posted.

Hi Claude,
I sent you a pm with my email address.
Thanks,
Will

Hello Will

I just send you files.
Some examples of scratch built Harmonie made by friend :

http://www.rcuniverse.com/forum/atta...mentid=2022533http://www.rcuniverse.com/forum/atta...mentid=2022534http://www.rcuniverse.com/forum/atta...mentid=2022535http://www.rcuniverse.com/forum/atta...mentid=2022536http://www.rcuniverse.com/forum/atta...mentid=2022537http://www.rcuniverse.com/forum/atta...mentid=2022538http://www.rcuniverse.com/forum/atta...mentid=2022539http://www.rcuniverse.com/forum/atta...mentid=2022540

nice pics

Two current .... one Suprafly 60 .... and a modern Dirty Birdy....

http://www.rcuniverse.com/forum/atta...mentid=2022568http://www.rcuniverse.com/forum/atta...mentid=2022569

Here's mine. I bought it in this condition. Glass fuse w/ sheeted foam & glassed wing. Came with new speed .61, new header and old pipe.
Has Kraft wheels, fixed gear. Never finished, no holes for push rods and no mount for aileron servo.
I plan to finish it someday.

Desire 60 scratch built from Flying Models plans (Mike McConville). Converted to e-flight Power 90 on 8c, ESC CC 80A HV, APC 17x12, 1800w. Weight 8.2 lbs.
Flies the Advanced pattern at 7,200 ft ASL.

http://www.rcuniverse.com/forum/atta...mentid=2022859http://www.rcuniverse.com/forum/atta...mentid=2022860

Hope they kit this one....

Niall,
I can understand your desire to see this kitted.
It has to be your best effort so far - looks like you have made some effort to get the thrust line right and that you have paid particular attention to the lateral balance :D

Brian