Synergy 90 ARF
 

I have a Stream 90 from Hirobo. I am VERY impressed with it, and I have seen nearly every AA capable plane on the market. This definately is a Japanese treasure.

Synergy 90 ARF
 

Yes the Stab is counter-balanced.

I don't see any reason why the OS 91FX wouldn't work, as Alvin has one fitted with it, so perhaps he could offer an insight.

Steven, any estimated weight on the Stream?

Synergy 90 ARF
 

I expect the weight to be a touch more than the Synergy.. about 3.5-3.75kg.. maybe as much as 4 if we horseshoed a 140 inside. However, the YS 110 is the engine of choice.. me thinks. You think at 3.75 an OS 91FX will do the business? We have two here... mine as I said is for the 110, the other is considering a different route....

Synergy 90 ARF
 

Artistic-aero

Just ordered a Synergy, Is the YS 110 availalbe in the UK yet? Is it the same size as the 91FZ.

Cheers
Simon

Re: Synergy 90 ARF
 

How did your synergy fly? will it do every 3d in the book like they say?? Is it worty $500 or should i just buy a Ucando for 189?
do you have any other pics you can send me? will take all you have
thanks
email is [email protected]

Synergy 90 ARF
 

Well, unfortunately, we ran into engine troubles with our YS91. We think we gotten it solved now, so we will try again next weekend. We did have a short go though, amid briefly, and with the engine a little down, no wild 3D. But it was very pattern like, and looks like an excellent choice for one with any inclination towards pattern as well as 3D, commanding an excellent presence.

For 3D, strong and powerful elevators servos are a must on this, as the elevators are huge, and to prevent fluttering. Once we get our engine running proper, and sort out some other minor problems, I don't see why it can't 3D!

Synergy 90 ARF
 

Pic

Synergy 90 ARF
 

another one(not maximum deflection

Synergy 90 ARF
 

How about some pics of the bottom when we get the flight report? Thanks.

Synergy 90 ARF
 

regarding the flight with the OS 91 FX we did not take any picture as we just did build the engine inverted, fixed a Genesis Mini pipe on it.
Results were quite good, not as good as witht the YS 91 as the two stroke engine has less torque than the 4-stroke one. However the combination Synergy with OS 91 FX is a combination that we can recommend without any reservation.

Now we just start with the people from WESTON UK to make a special "inside" pipe for the plane, with a special swan neck manifold and a pipe that will have the outlet in the center showing directly down. As soon as available will take pictures.
Alvin

Synergy 90 ARF
 

What servos and gear are you using Derek?

Synergy 90 ARF
 

Oh, and what accesories do you need to complete it.

Synergy 90 ARF
 

Derek,
Would you tell me how the wing is mounted?

4-wing bolts? (easier to chage incidence?)

2-teflon dowel in front w/ 2 wing bolts in the back? (my Pilot BeatOn90 have this setup. Probably most used setup.)

Based on the first picture, the plane doesn't take a pipe that we use on pattern plane.
Is the plane setup for standard stock muffler or is there a belly pan or something?

I would love to have one of this as I have JR Propo Explorer V90.

Thanks,

Ihncheol Park

Synergy 90 ARF
 

Robert:
I think any of Futaba's high quality servos would work fine, regardless of digitals or non-digitals, just make sure they are mated well to the particular purpose, as the surfaces are huge.

Most hardware are provided, though whether one chooses to use them is another matter. For eg, plastic hinges are provided, and some may want to switch to paper hinges. Obviously if they provided high end accessories, the cost would be astronomical

Ihncheol: The wing is held on with 2 dowels in front, and 2 bolts at the back. All the holes are already pre-drilled.

The setup is meant for a internal pipe. It works like any other ZN pattern kit actually, with the pipe being enclosed with a Balsa belly pan. It would work fine with a Hatori pipe, or even a Carbon Pipe. Christophe uses an Asano pipe on his, and some modification on the fuselage is required due to long pipe.

We managed to sort out the engine yesterday, and had some flights before it rained. This plane is definitely highly recommended for pattern entrants, rolls are crisp, and snaps are precise. It presents very well too in the air. I need to tweak the setup for 3D, but the rain came...

Synergy 90 ARF
 

What is the Synergy 90 3d like in knife edge and what about 3D manuvers?
I am looking for another plane that will do it all , pattern 3d and stuff in bettween, especially knife edge.At the moment, I can't decide bettween the Synergy 90 3D , The majestic clone called the High Society and the Funtana.Any thoughts or comments?
Thanks
Luke

Synergy 90 ARF
 

HI Guys
Do any of you know if the Synergy 90 3D will be coming out in the Uk?It looks really good. Do any of you guys know waht it is like to fly when it comes to 3D and knife edge flying? I would really like to know of any information you may have on it.
Thanks for any reply
Luke

Synergy 90 ARF
 

Look at the Rhapsody´s at www.probuild-uk.co.uk

Synergy 90 ARF
 

Any new news on the Synergy 90 3D?
Anyone got a picture of the bottom yet?

Thanks, Jim

Synergy 90 ARF
 

Synergy 3D should be filtering through in the next month or so here in the UK. I know Probuild have an order in but phone to see if they are all reserved. The demand has been really high but I am sure they will be here in time for the new season.

Synergy 3D - Wow!
 

Wow a just picked up this thread...

I am also interested in the performance of the Synergy 3D. Since my Seduction Demonstrator never got built :stupid: , I am looking for a similar ARF for AA. On top of my list are the Hirobo Stream Hi-Perf and of course the Synergy 3D, both setup with YS-110.

Derek - did you have any more chance to test out your Synergy 3D? Hope you can provide some more flight reports or pictures. How was the knife edge performance or torque roll? (What was the final weight of your model)

The control surfaces looks huge :eek: ! I wonder if you can get a smooth pattern flight out of it! And I noticed the stab is not airfoiled - wonder why? Also What's the covering scheme on the bottom? I hope they put out an ARC verson soon - I don't like the covering scheme, or it is just me? :confused:
Matt

Synergy 90 ARF
 

Hi artistic-aero,

I am really looking forward to your AA site and reading your review on the Synergy + YS110, Stream 90 Hi Perf + YS110, JR Explorer + YS110 and an MK 3D Dancer + YS110 debut. Those are really the best AA planes available today, with YS110 power to boot!

I can just imagine you guys have too much fun! Let us know how it turns out.
Matt

Synergy 90 ARF
 

Hello everybody ( hi Marc ! )

I'm a Belgium pilot so sorry for my "strange" English !!!

Last week I'have seen He synergy 3D at ZN workshop and it's probably the moist ARF kit I ever seen since today. :spinnyeye
This ARF kit looks like every other ZN plane: Simply perfect...
For the High price, who can do exactly the same for a lower price ?
I think that i'll buy this in a few days with a YS 110...see you soon !

Synergy 90 ARF
 

Mine should be here in a week or two.
I'm really looking forward to getting it!

Jim

Some Synergy 90 detail photos
 

Here are some various shots of our new Syn90. We double face taped the throttle servo to a small piece of ply and placed it just inches behind the firewall.

More
 

The inside. Parts fit is great on this ARF. Lots of lightening on a birch/balsa sandwich.