The belly pan
 

This attaches with two brass pins up front and one screw in the back. Takes only a minute to assemble this at the field.

Synergy 90 ARF
 

Wanna give me one of those Mark?

Inside of the belly pan
 

Nice work!!!

Robert, they are starting to ship all over now.
 

Belly pan fits perfectly!

The front
 

The square piece glued to the firewall is actually two tapered pieces that set the right and down thrust. Centering the motor mount on this piece and then aligning the big hole perfectly centers the motor on the thrust line easily.

Cowl
 

Fiberglass, light weight, great fit.

Wing bottom
 

Here is a bottom shot

Bolt seats
 

End cut hard balsa. Very solid, very clean. I like the details put into this airplane.

Wing top
 

Nice sized ailerons. I am thinking rolling harriers all day long right now!!!!!!!!!!!

Synergy 90 ARF
 

wanna GIVE me one of those Mark??? hehehe
Say, hows the Funtana going?

The motivator!!!
 

Yes, these are real. Ohhh, what a stroke of luck. Many many thanks to the YS factory!!!!!!!!!!!!!!! You guys are tops!!!

It hangs nicely on the front
 

Remember, the 1.10 is a direct bolt on replacement for the .91 with more 3D power.

Fits perfectly
 

Notice that I have canted the motor slightly. This will keep the Hatori flex header away from the cowl and allow me to keep the cowl closed.

Robert, the Funtana is sitting out this horrible winter but it still looks great. The OS1.60 FI runs great in it.

Big propellor
 

Here Syn90 sits upon our 3 x 1.5 meter CNC routing table. This table is worth it's weight in...er...balsa...no...carbon fiber mat.

The 1.10 will swing that 15" prop better than the .91. 3D thrust power!!!!!!!!!!!!!!!!!!!

Like a fish!!!
 

Skinny, but beaucoups side area. Knife loop on takeoff!!! High alpha knife-edge!!! No problem!!!

The bottom
 

Here is what she looks like underneath. Belle, n'est ce pas? Beautiful, no?

Synergy 90 ARF
 

Here is Pipo, the ZN dog and real chief of the shop.

Synergy 90 ARF
 

Nice pictures, Mark !

I should have a kit on display at the JR IMAC Challenge (2/26 - 3/2) in Punta Gorda (West coast of Florida, under Tampa) with a YS110 as well.

6 kits are currently sitting in a container going to Central Hobbies, should arrive by the end of the month. Some are already sold, some are still available...
Did I say JUMP ON THE PHONE and dial 1-800-723.5937 !!! ;>)

Ben P.
Boca Raton, FL

Synergy 90 ARF
 

O.K. Now I really can't wait to get mine. My YS 110 should be here in a week or two also.

Thanks for all the great pics Mark. Now I finally know what the bottom looks like.

Jim

By the way, I was told that I got the last one of the batch that Central Hobbies is getting in. Sorry guys.............

Enough throw?
 

I think it wll roll.

Thanks guys.
 

Just about to the end of the photos here. A couple more control shots.

Synergy 90 ARF
 

Tail grouping for a very, VERY flat upright spin!!!

And the last shot!!!
 

We can't wait to put her in the air!!!

For all those patiently waiting. We appreciate your patience very much and hope that your wait will be fully rewarded with the best ARF in it's class.

I hope you enjoyed the photos!!!
 

We should give our thanks to JP at the Z ZNLine shop for his Nikon CoolPix 5700 and the airplane!!! Thank you JP!

Comment vas-tu? JP

Cool Pics!
 

Mark,

Thanks for the photos for the rest of us to dool! :rolleyes: :rolleyes: It looks perfect. I think this plane will set new standards for 90-class AA. Somehow I could not get myself to like the covering scheme, but that's another story. Let us know how she flys with the YS-110!

I wonder why ZN/CPLR did not design an airfoil stab for a plane this size? It would improve strength and appearance. And I notice that the YS is HARD mounted?? :confused: :confused:

Hey Mark, you have too many planes!! :mad: If you run out of space to put them, just send them to meeee!!! :D

Matt