Kraz-255. Full metal 6x6.
#28
Thread Starter
Join Date: Jun 2008
Location: Moscow, RUSSIA
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
RE: Kraz-255. Full metal 6x6.
ORIGINAL: hands without shadows
Any pictures of the tools used? Milling machine?
Any pictures of the tools used? Milling machine?
#37
Thread Starter
Join Date: Jun 2008
Location: Moscow, RUSSIA
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
RE: Kraz-255. Full metal 6x6.
Test sound simulator
http://www.youtube.com/watch?v=OxRFm4_HFws
http://www.youtube.com/watch?v=cNq5wLqqcEY
ORIGINAL: The Mad Modder
It looks like it's almost finished. Will you be painting it olive drab?
It looks like it's almost finished. Will you be painting it olive drab?
#40
RE: Kraz-255. Full metal 6x6.
honestly looks brilliant the level of detail
One thing thats been bugging me looked through the pics, but didn't see a clear pic of the area. How did you make the middle Wheely king axle so you could drive the rear diff off it?
I ask cause I have a Wheely king sitting here, and been wanting to make a 6wd vehicle for a while(almost since I got into off-road RC), but was curious what parts were needed.
One thing thats been bugging me looked through the pics, but didn't see a clear pic of the area. How did you make the middle Wheely king axle so you could drive the rear diff off it?
I ask cause I have a Wheely king sitting here, and been wanting to make a 6wd vehicle for a while(almost since I got into off-road RC), but was curious what parts were needed.
#41
Thread Starter
Join Date: Jun 2008
Location: Moscow, RUSSIA
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
RE: Kraz-255. Full metal 6x6.
ORIGINAL: SyCo_VeNoM
One thing thats been bugging me looked through the pics, but didn't see a clear pic of the area. How did you make the middle Wheely king axle so you could drive the rear diff off it?
I ask cause I have a Wheely king sitting here, and been wanting to make a 6wd vehicle for a while(almost since I got into off-road RC), but was curious what parts were needed.
One thing thats been bugging me looked through the pics, but didn't see a clear pic of the area. How did you make the middle Wheely king axle so you could drive the rear diff off it?
I ask cause I have a Wheely king sitting here, and been wanting to make a 6wd vehicle for a while(almost since I got into off-road RC), but was curious what parts were needed.
#42
RE: Kraz-255. Full metal 6x6.
the 6 x 6 center drive axle is vey easy to make. You will need the front axle case half and input pinion to assemble to the rear of one of your axles so when its completed you will simple have two axle fronts with two pinions, it simply that easy, then your rear most axle will have to be installed upside down to get the rotation correct.
Like so!
Like so!
#43
RE: Kraz-255. Full metal 6x6.
ahh ok kinda what I figured, but when I took mine apart to see it looked like there was a lip on the one case half which I thought would interfere with the other.
now to get a 3rd WK axle
now to get a 3rd WK axle
#49
Thread Starter
Join Date: Jun 2008
Location: Moscow, RUSSIA
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
RE: Kraz-255. Full metal 6x6.
ORIGINAL: SyCo_VeNoM
excellent job man
the rust even looks real.
excellent job man
the rust even looks real.