3D Printable 1/16 RC Tanks
03-02-2023, 12:41 PM
#77
Thread Starter
MT-LB "Rapira"
https://cults3d.com/en/3d-model/various/mt-lb-rapira?fbclid=IwAR1b5Fizl8OLUEXnZbtFaaScVI0mXapcke S_orT8AboDqdPhhNBQOtpI5U0Thanks
Jimmy
The following users liked this post:
PE YOUNG (03-03-2023)
03-02-2023, 12:47 PM
#78
Thread Starter
ESK Mungo
https://cults3d.com/en/3d-model/various/esk-mungo-1-16-konstrukteur?fbclid=IwAR2UqkZtts04sWwoKe23SNaGflEv FQ4e4hrhtliEUe9KmzDDE1dVP68Xtsk&mibextid=ncKXMAThanks
Jimmy
03-02-2023, 12:50 PM
#79
Thread Starter
TPZ Fox
https://cults3d.com/en/3d-model/various/tpz-fuchs-1-16?fbclid=IwAR3k2tcWkAfeu7T7U-nSQP6bHZFGz7SnKZLrrKoeFoAdpvmh86hwhKktcOU&mibextid=ncKXMAThanks
Jimmy
03-03-2023, 02:47 AM
#80
I like the fox, I'll have to check and see if it includes the STL files for the tires and rims. Those could be very useful in a variety of projects. As for the turretless tank, is it just me, or is there something about a turretless tank that just doesn't seem quite right? Like something is missing? I know, it's the turret! Where the hell is it? 
03-03-2023, 01:06 PM
#81
I agree Gary - No turret makes for very limited combat effectiveness. But still high on the cool factor - maybe because of the desperate nature of their purpose.
Photo of my favorite "turretless tank"
The Swedish S tank was probably the pinnacle of design perfection for the turret less design.
Not forgetting the little Hetzer. At least with it you're not hanging "knees in the breeze" like the others.
Bob
Photo of my favorite "turretless tank"
The Swedish S tank was probably the pinnacle of design perfection for the turret less design.
Not forgetting the little Hetzer. At least with it you're not hanging "knees in the breeze" like the others.
Bob
The following users liked this post:
PE YOUNG (03-03-2023)
03-03-2023, 01:57 PM
#82
M4A3E8. Printed from RC_3D_Tanks on Cults3D. Another fun build. A bit more complicated than the M18. The fit of the parts was not as well refined, (it is an earlier design). It runs with a Heng Long 6.1s with servo recoil and elevation. Heng Long Pershing tracks will fit with HL sprockets.
03-13-2023, 11:03 PM
#84
03-14-2023, 05:25 PM
#85
Thread Starter
Thanks
Jimmy
03-14-2023, 05:42 PM
#86
Already have the two lower plates of the Comet printed.
Derek
Derek
The following users liked this post:
bowlman (03-15-2023)
03-14-2023, 05:53 PM
#87
Thread Starter
03-14-2023, 11:44 PM
#88
Derek
03-15-2023, 06:47 PM
#89
Thread Starter
Thanks
Jimmy
03-23-2023, 04:53 AM
#90
Senior Member
I agree Gary - No turret makes for very limited combat effectiveness. But still high on the cool factor - maybe because of the desperate nature of their purpose.
Photo of my favorite "turretless tank"
Attachment 2272558
The Swedish S tank was probably the pinnacle of design perfection for the turret less design.
Not forgetting the little Hetzer. At least with it you're not hanging "knees in the breeze" like the others.
Attachment 2272559
Bob
Photo of my favorite "turretless tank"
Attachment 2272558
The Swedish S tank was probably the pinnacle of design perfection for the turret less design.
Not forgetting the little Hetzer. At least with it you're not hanging "knees in the breeze" like the others.
Attachment 2272559
Bob
The following users liked this post:
RC_BobM (03-24-2023)
The following users liked this post:
Will01Capri (03-24-2023)
03-30-2023, 12:12 PM
#92
Thread Starter
BMP-2
https://cults3d.com/en/3d-model/various/bmp-2-rc_3d_tanksThinks
Jimmy
04-11-2023, 06:46 PM
#93
Thread Starter
Japan Type 74
https://cults3d.com/en/3d-model/various/type-74https://en.wikipedia.org/wiki/Type_74
Thanks
Jimmy
Last edited by bowlman; 04-11-2023 at 06:50 PM.
The following users liked this post:
bowlman (04-14-2023)
04-25-2023, 01:05 PM
#95
Thread Starter
Merkava 3D
https://cults3d.com/en/3d-model/various/merkava-3dhttps://en.wikipedia.org/wiki/Merkava
Jimmy
Last edited by bowlman; 04-25-2023 at 01:07 PM.
The following users liked this post:
dkaniel (04-26-2023)
04-29-2023, 02:25 PM
#96
Thread Starter
Infrared system (PUMA or FG 1250) for German tank (Tiger, Panther) 1/16
https://cults3d.com/en/3d-model/game/rc-tank-systeme-infra-rouge-puma-ou-fg-1250-pour-char-allemand-tigre-panther-1-16-steve_sp78
Thanks
Jimmy
04-29-2023, 02:40 PM
#97
I'll bet if you scale that up to 1/6 scale it will be big enough to hide a camera in there. I thought about that for my hetzer, Mount the unit directly underneath the barrel, put the camera in what was actually the IR light, and in what was actually the camera, put a laser pointer. That wouldn't be perfect, but it would give you a very good idea of where your paintballs will go if the barrel is pointed straight ahead.
04-30-2023, 10:10 AM
#98
Crius Don't even have to scale it up... I made an FPV Camera Housing for my Tamiya #56020 Leopard 2A7+ barely larger than the stock 2A6 Commanders Panoramic Sight ( More Information on that... ):
For my 3D Printed E-100 I got myself a TBS Camera Module with a size of less than 6x6x5mm to fit into that Tanks Panoramic Sight.
And while you barely can't fit it into the IR-Receiver Tube of the FG1250 the Spotlight would be fair Game ( More information on that... ):
Though I haven't considered doing that 😁
For my 3D Printed E-100 I got myself a TBS Camera Module with a size of less than 6x6x5mm to fit into that Tanks Panoramic Sight.
And while you barely can't fit it into the IR-Receiver Tube of the FG1250 the Spotlight would be fair Game ( More information on that... ):
Though I haven't considered doing that 😁
The following 3 users liked this post by Durahl:
05-01-2023, 01:44 AM
#99
That's pretty much exactly what I had in mind, the camera in the IR lamp and the IR LED in the camera. But if I were to use this for a 1/6 scale tank I would definitely scale it up. It looks good, but I think it would look too small on a 1/6 scale tank.
The following 2 users liked this post by Delta_19:
bowlman (05-01-2023),
Conan_the_Hungarian (05-17-2023)