Hey guys,

What's the right percentage to convert 1/35 to 1/16....218%?

Please help... Math... make... Hulk's... head...... hurt.



Shep

2.187

To be completly accurate it's 218.75%. For my Jagdpanther I rounded up to 218.8% and the Tamyia Panther gearbox fitted in exactly.

Thanks Panther F,

Instead of the Grant Tank project that I was planning, I started work on a Panzer 38(t).... I've put the basic hull together, and when I compared it to my Tiger 1, I said.... no way it could be that tiny I said to myself. But I photocopied up an old Italeri 1/35 38(t) at 219%, so I guess it's accurate.

Thanks again.
Shep

Yeah, 220 ... 221, whatever works.

the easiest way to up scale is measure the 1/35 part then mul;tiply it by 35 then divide by 16 you will have the 1/16th scale dimension

YUP!

35 divided by 16 = 2.1875 so you can just measure the 1/35 part and multiply by 2.1875

So rounding off the multiplier from 2.1875 to 2.19 would be close enough

BEST SITE IN THE WORLD: http://www.printmini.com/calc.shtml

(for calculating sizes between scales, very accurate)