Creeping Death Updates
08-12-2010 | 10:14 AM
#51
My Feedback: (2)
RE: Creeping Death Updates
ORIGINAL: dyeager535
Note to all, as I see it far too often here. There should be a symbol of a flower either on your camera, or in the settings of your camera. Use it. It lets you take close up, detailed photos. Only one out of the five you posted can I tell what it's of with any detail. It's not just you, it happens a fair bit on this forum.
ORIGINAL: Saxondog
My first Creeping Death turret, fried limit switch due to burning with soldering gun, second turret completely fried, third turret required a replacement gun from VS which I was told would have the 140fps if I simply added the special C/D SEAL made from special polymers mixed just for C/D. I agreed to accept the promise of the first new gun system in exchange for not seeking a refund through paypal.
<br type=''_moz'' />
My first Creeping Death turret, fried limit switch due to burning with soldering gun, second turret completely fried, third turret required a replacement gun from VS which I was told would have the 140fps if I simply added the special C/D SEAL made from special polymers mixed just for C/D. I agreed to accept the promise of the first new gun system in exchange for not seeking a refund through paypal.
<br type=''_moz'' />
Note to all, as I see it far too often here. There should be a symbol of a flower either on your camera, or in the settings of your camera. Use it. It lets you take close up, detailed photos. Only one out of the five you posted can I tell what it's of with any detail. It's not just you, it happens a fair bit on this forum.
I agree why post a photo if you can't even see it?
08-12-2010 | 07:58 PM
#52
Senior Member
Joined: Apr 2009
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
From: Memphis,
TN
RE: Creeping Death Updates
My issues are with the people that attacked me in the beginning, like PATTONROCKS bragging about getting my gun, and all that mess. I said very little, my original intent which only a few seem to understand is the man was dishonest, and siad many things when in the light of day were plain lies.<div>
</div><div>He told the same lies to others who seem to avoid the discussion of those details, fine I agree with Perry,YHR, and even you ERN. I have tried to involve you ERN because the same things Shelby told me he told you, the custom molded patent pending gun, all the lawyer stuff but your right,I'll trouble you no more with the facts.</div><div>
</div><div>Perry,YHR, we have not always seen things the same way, but we have always respected the other mans opinion. Thanks for seeing the intent, which was to express my opinion after everyone else was allowed to speak their opinion without insult or childish threats. </div><div>
</div><div>As for my actions against Shelby, he is aware of those actions. But I still maintain I have as much right to call attention to a vendors negative ways as anyone else. But the issue is not helping anyone, and whatever might be said, my intent was and still is to bring the other side of this issue to light.</div><div>
</div><div>I am through as at this point their is no benefit, if the truth is not a benefit, then the fantasy most become the truth.</div><div>
</div><div>DYEAGER535, ACTUALLY thank-you. Those pictures are over a year old, and at the time I was not very competent with the camera. I do have a new one from fathers day that has been difficult for me to use. Your knowledge is helpful as with most small devices are challenging for me.</div><div>Try to adjust a camera, well let's just leave it at that. I would like to ask you some questions about this new camera and you guidance will be very helpful, </div><div>
</div><div> So it seems something positive has come from this situation after all. Perry on a side note they gave me a discount for the new contriol module, worked out at 32.oo each but for some reason they are back ordered, Claude will keep trying and we have moved forward with the original components with the smaller accumulators. It has been a tight fit and the deck had to be raised 10mm but all is well. Albert has a complete working system and I will have some time Sunday to catch up.</div><div>
</div><div>best regards to all,nothing personal intended or taken from this discussion at this point. Blake / Saxondog</div><div>
</div><div>
</div>
</div><div>He told the same lies to others who seem to avoid the discussion of those details, fine I agree with Perry,YHR, and even you ERN. I have tried to involve you ERN because the same things Shelby told me he told you, the custom molded patent pending gun, all the lawyer stuff but your right,I'll trouble you no more with the facts.</div><div>
</div><div>Perry,YHR, we have not always seen things the same way, but we have always respected the other mans opinion. Thanks for seeing the intent, which was to express my opinion after everyone else was allowed to speak their opinion without insult or childish threats. </div><div>
</div><div>As for my actions against Shelby, he is aware of those actions. But I still maintain I have as much right to call attention to a vendors negative ways as anyone else. But the issue is not helping anyone, and whatever might be said, my intent was and still is to bring the other side of this issue to light.</div><div>
</div><div>I am through as at this point their is no benefit, if the truth is not a benefit, then the fantasy most become the truth.</div><div>
</div><div>DYEAGER535, ACTUALLY thank-you. Those pictures are over a year old, and at the time I was not very competent with the camera. I do have a new one from fathers day that has been difficult for me to use. Your knowledge is helpful as with most small devices are challenging for me.</div><div>Try to adjust a camera, well let's just leave it at that. I would like to ask you some questions about this new camera and you guidance will be very helpful, </div><div>
</div><div> So it seems something positive has come from this situation after all. Perry on a side note they gave me a discount for the new contriol module, worked out at 32.oo each but for some reason they are back ordered, Claude will keep trying and we have moved forward with the original components with the smaller accumulators. It has been a tight fit and the deck had to be raised 10mm but all is well. Albert has a complete working system and I will have some time Sunday to catch up.</div><div>
</div><div>best regards to all,nothing personal intended or taken from this discussion at this point. Blake / Saxondog</div><div>
</div><div>
</div>
