YT International / ModelTech P51 Mustang 90 size
#1
Member
Thread Starter
Join Date: Jan 2003
Location: Sheffield, UNITED KINGDOM
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
YT International / ModelTech P51 Mustang 90 size
Hi all been a while since I posted on this forum so here's a real challenge.
I have a fuselage section for the above plane which used to be an ARTC kit. I have just a fuse section as it was damaged in transit to the shop, and was replaced by YT Int. This was at least 12 months ago poss. longer.
I've been in touch with YT and they no longer stock the kit. Have a look at the attached image to see what I mean about the fuse section.
I would be interested to hear from anyone who knows if this kit is still being made and where I might get the rest of the bits from. As I live in the UK transport might be a problem, but lets see if there's any being made first, before we cross that bridge.
Cheers everyone
Andy
I have a fuselage section for the above plane which used to be an ARTC kit. I have just a fuse section as it was damaged in transit to the shop, and was replaced by YT Int. This was at least 12 months ago poss. longer.
I've been in touch with YT and they no longer stock the kit. Have a look at the attached image to see what I mean about the fuse section.
I would be interested to hear from anyone who knows if this kit is still being made and where I might get the rest of the bits from. As I live in the UK transport might be a problem, but lets see if there's any being made first, before we cross that bridge.
Cheers everyone
Andy
#3
Member
Thread Starter
Join Date: Jan 2003
Location: Sheffield, UNITED KINGDOM
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
YT International / ModelTech P51 Mustang 90 size
Purely cosmetic.
The are a few dents in the balsa skin, a particularly bad one around the airscoop area. These can either be filled or chopped out and replaced. Otherwise I wouldnt have bothered.
Andy
The are a few dents in the balsa skin, a particularly bad one around the airscoop area. These can either be filled or chopped out and replaced. Otherwise I wouldnt have bothered.
Andy