Community
Search
Notices
Redcat Racing Support Moderated Support Forum for all Redcat Racing Cars, Trucks & Buggies

Ive found a problem

Thread Tools
 
Search this Thread
 
Old 05-31-2007 | 11:02 AM
  #1  
bluecaka69's Avatar
Thread Starter
 
Joined: Feb 2006
Posts: 2,169
Likes: 0
Received 0 Likes on 0 Posts
From: bILLINGS, MT
Default Ive found a problem

So I was out runnin the trmoer buggy today and at high speeds it kept on cutting out so
first thought was to lean or to rich so I messed with settings for awhile and came to the conclusion thats not the problem
second thought I seen air bubbles in fuel tank and line so I continued to makes sure everyhting was sealed properly and no air was getting into line i installed new fuel line problem not solved
By now I was getting pissed and could not figure it out so took th tank out and notices it rides directly on the chassis NOT GOOD i put some O rings between the chaasis and fuel tank BAM problem solved
After further investigation it turns out that the vibration of the chaasis was tranfering to the fuel tank h=thereofre causeing the fuel to be shakin up and creating air bubbles at high speed causeing car to run super lean and cut out
Hope this helps out someone in the future
Old 05-31-2007 | 11:24 AM
  #2  
{GBI}Harryball's Avatar
Senior Member
 
Joined: Jul 2006
Posts: 1,261
Likes: 0
Received 0 Likes on 0 Posts
From: lansing, MI
Default RE: Ive found a problem

I have a friend with a tornado bb that has air in his gas lines, ill have to pass this info on to him. Thanks for sharing
Old 05-31-2007 | 12:58 PM
  #3  
Senior Member
My Feedback: (1)
 
Joined: Jun 2005
Posts: 2,824
Likes: 0
Received 0 Likes on 0 Posts
From: Clermont, FL
Default RE: Ive found a problem

Good fine blue. I will check out mine.
Old 05-31-2007 | 01:27 PM
  #4  
Senior Member
 
Joined: May 2007
Posts: 334
Likes: 0
Received 0 Likes on 0 Posts
From: Sheboygan Falls, WI
Default RE: Ive found a problem

nice find, should bring it up with redcat, they can just throw some rubber washers betweent he tank mound and the tank to rais it a few.. or do what you did.. this is the kind of support a new company needs. helpin work out the bugs.. nice.
Old 05-31-2007 | 04:35 PM
  #5  
Senior Member
 
Joined: Apr 2007
Posts: 125
Likes: 0
Received 0 Likes on 0 Posts
From: Winnipeg, MB, CANADA
Default RE: Ive found a problem

I had the tank oof my eldorada and it had them installed around the screws already.
Old 05-31-2007 | 09:09 PM
  #6  
Senior Member
 
Joined: Apr 2007
Posts: 169
Likes: 0
Received 0 Likes on 0 Posts
From: Chilliwack, BC, CANADA
Default RE: Ive found a problem


ORIGINAL: bluecaka69

So I was out runnin the trmoer buggy today and at high speeds it kept on cutting out so
first thought was to lean or to rich so I messed with settings for awhile and came to the conclusion thats not the problem
second thought I seen air bubbles in fuel tank and line so I continued to makes sure everyhting was sealed properly and no air was getting into line i installed new fuel line problem not solved
By now I was getting pissed and could not figure it out so took th tank out and notices it rides directly on the chassis NOT GOOD i put some O rings between the chaasis and fuel tank BAM problem solved
After further investigation it turns out that the vibration of the chaasis was tranfering to the fuel tank h=thereofre causeing the fuel to be shakin up and creating air bubbles at high speed causeing car to run super lean and cut out
Hope this helps out someone in the future
This miss, did it occur near top end? like it would cut and never get past that certain rpm, kinda like a rev limiter?
Old 05-31-2007 | 09:16 PM
  #7  
bluecaka69's Avatar
Thread Starter
 
Joined: Feb 2006
Posts: 2,169
Likes: 0
Received 0 Likes on 0 Posts
From: bILLINGS, MT
Default RE: Ive found a problem

It sure did
ORIGINAL: G*Man


ORIGINAL: bluecaka69

So I was out runnin the trmoer buggy today and at high speeds it kept on cutting out so
first thought was to lean or to rich so I messed with settings for awhile and came to the conclusion thats not the problem
second thought I seen air bubbles in fuel tank and line so I continued to makes sure everyhting was sealed properly and no air was getting into line i installed new fuel line problem not solved
By now I was getting pissed and could not figure it out so took th tank out and notices it rides directly on the chassis NOT GOOD i put some O rings between the chaasis and fuel tank BAM problem solved
After further investigation it turns out that the vibration of the chaasis was tranfering to the fuel tank h=thereofre causeing the fuel to be shakin up and creating air bubbles at high speed causeing car to run super lean and cut out
Hope this helps out someone in the future
This miss, did it occur near top end? like it would cut and never get past that certain rpm, kinda like a rev limiter?

I had the tank oof my eldorada and it had them installed around the screws already.
yes the other redcts have the o rings to stop vibration but the tremor the tank is screwed on right threw the chassis and no o ring

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.