Power expander
10-04-2006 | 11:27 PM
#1
Thread Starter
My Feedback: (19)
Joined: Sep 2003
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
From: Jacksonville,
NC
Power expander
I was wanting to know what channels are amplified on the expander? I am hooking my elevators into 2 and 8, and wanted to make sure they are both amplified. I am pretty sure 2 is but not about 8. The servo's are 5995's so I need the juice. Oh yea its the futaba expander with the turbo reg.....
10-05-2006 | 08:59 AM
#2
Senior Member
Joined: Sep 2004
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
From: Tempe,
AZ
RE: Power expander
Hi,
The channels that have 2 servo outputs are NOT amplified. All the channels with 4 servo outputs ARE amplified.
Please let me know if you have any more questions.
The channels that have 2 servo outputs are NOT amplified. All the channels with 4 servo outputs ARE amplified.
Please let me know if you have any more questions.
