how do i use the program card for a mini cat or mini Y

read the instructions i can give you the switch settings but will need to no what battery u are using how many cells it should be a 3 cell.?
you will also have to set up the throttle on your radio but you cant do this until the card is set up.

I bought the Carbon Fiber mini cat and the mini Y from gravity hobby but i got no paper work  at all on these boats,NOTHING

This may help http://minicatracingusa.com/images/i...scinstruct.pdf</p>

i have the same boat the mini carbon fibre.


this is the battery you will need. in the link.
you will also need a charger.

http://www.hobbyking.com/hobbyking/s...dProduct=14857

http://www.hobbyking.com/hobbyking/s...idProduct=8932

you will also need these to solder to the esc for the battery to plug into

http://www.hobbyking.com/hobbyking/s...idProduct=9572

the settings on the card are as follow
1on
2off
3on
4off
5on
6on
7off
8on
9on
10off
11off
12on
img819.imageshack.us/f/img002wp.jpg/

img190.imageshack.us/f/49671174.jpg/

img521.imageshack.us/f/64894623.jpg/

both of the boats should be the same set up.

hope this helps!

Thanks for the help.Why don't these boat sellers give you the info on how to operate &amp; set up these boats

it took me 5 days of ripping my hair out to work out that stuppid programming card. i was ready to chuck the whole kit n cuboodle in the bin.

here is a video i shot yesterday of my mini cat.
[youtube]http://www.youtube.com/watch?v=BspW5l8vtQM[/youtube]

your boat is realty fast, are you using a 2200 20c 3cell battery?What about the prop?

I ahven't got a chance to set mine up yet, I am starting on the mini Y first.Its tite to fit it all in there

did you get it sorted?

Yes thanks for your help