Expresscraft Mti Cat Bulkhead
08-29-2009, 10:37 AM
#1
Junior Member
Thread Starter
Join Date: Mar 2004
Location: ST.Croix, VIRGIN ISLANDS (USA)
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Expresscraft Mti Cat Bulkhead
Hey Guys
I'm looking for the bulk head plans for the expresscraft Mti 60" cat that a good will member maid available to other members here on the forum. I've emailed a member on the forum whom I thought might have them but no response as yet ,so I thought I'll see if any other member may be able to help me and save me some time and work in trying to make one myself
.
Thanks
Austin
I'm looking for the bulk head plans for the expresscraft Mti 60" cat that a good will member maid available to other members here on the forum. I've emailed a member on the forum whom I thought might have them but no response as yet ,so I thought I'll see if any other member may be able to help me and save me some time and work in trying to make one myself
.Thanks
Austin
08-29-2009, 12:23 PM
#2
Senior Member
My Feedback: (1)
Join Date: Sep 2008
Location: Indio,
CA
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
RE: Expresscraft Mti Cat Bulkhead
You may want to try contacting Tom@ Expresscraft or Carl@ Plum Krazy. They may be able to help you out.
http://www.expresscraft.com/
http://www.plumkrazyrcboats.com/
http://www.expresscraft.com/
http://www.plumkrazyrcboats.com/
08-29-2009, 01:28 PM
#3
RE: Expresscraft Mti Cat Bulkhead
Never knew there was a need for bulkhead plans for the MTI. Have not seen them mentioned anywhere.
I have an MTI build on the bench and cannot say I have seen the need for the bulkhead to be reinforced.
Maybe you can copy us in if you turn up plans
I have an MTI build on the bench and cannot say I have seen the need for the bulkhead to be reinforced.
Maybe you can copy us in if you turn up plans
08-29-2009, 02:48 PM
#4
Senior Member
Join Date: Sep 2007
Location: Nottinghamshire, UNITED KINGDOM
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
RE: Expresscraft Mti Cat Bulkhead
i think it's showtime808 who as the plan for the bulkhead.
http://www.rcuniverse.com/forum/m_82...tm.htm#8291131
http://www.rcuniverse.com/forum/m_82...tm.htm#8291131
08-30-2009, 11:13 AM
#6
Junior Member
Thread Starter
Join Date: Mar 2004
Location: ST.Croix, VIRGIN ISLANDS (USA)
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: Expresscraft Mti Cat Bulkhead
Justaddwata do you have any video of that cat running? What speed are you getting with the Qd 25 and what prop are you using?
Austin
Austin
08-30-2009, 12:07 PM
#7
RE: Expresscraft Mti Cat Bulkhead
I purchased the hull minus motor from a friend earlier this year. He only ran it a time or two and was very disappointed with what Expresscraft had shipped him. I would guess it was running around the upper 40's to 50 mark but know it had more on tap (motor was brand new and tight). He ran it with a 7016/2 prop which was stock and ran quite well - probably more potential from this prop (and others).
I am in the process of adding an inline zenoah. Just been tied up with other domestic projects.
Pics - http://imageevent.com/justaddwata/20...ewmticatandgtx
Pics and clips of it running with QD25 - http://imageevent.com/justaddwata/boatingbeachpond (note the clips are slow to load - I will have to put them on youtube one of these days).
Pics with the rails out figuring the inline install and layout - http://imageevent.com/justaddwata/myboats/mticat
I am in the process of adding an inline zenoah. Just been tied up with other domestic projects.
Pics - http://imageevent.com/justaddwata/20...ewmticatandgtx
Pics and clips of it running with QD25 - http://imageevent.com/justaddwata/boatingbeachpond (note the clips are slow to load - I will have to put them on youtube one of these days).
Pics with the rails out figuring the inline install and layout - http://imageevent.com/justaddwata/myboats/mticat
