need muffler for .75
#1
Thread Starter

Joined: Nov 2005
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
From: Riva, MD
I have a .75 that i bought about eight years ago. Goofed a landing and broke the muffler. I need either a source of parts for this engine, or a good aftermarket muffler for this engine. And what about tuned pipes? It's going to go on an airboat, so the tuned pipe would stick out pretty far behind the boat, anyway to get around this?
thanks.
kurt
thanks.
kurt
#2

My Feedback: (11)
An exhaust system for the current SuperTigre G-75 should fit your engine.
If it has a round cylinder head, then we'd not have case or head for it, but the internal parts for the G075 should work fine. Tuned pipes would be from an after-market maker. We'd not know of any that would not stick out aft.
If it has a round cylinder head, then we'd not have case or head for it, but the internal parts for the G075 should work fine. Tuned pipes would be from an after-market maker. We'd not know of any that would not stick out aft.
#4
Member
My Feedback: (3)
Joined: Oct 2004
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
From: Chehalis,
WA
Tower Hobbies stocks the original muffler and aftermarkets. I have a Slimline pitts on my ST75 and they also sell the MACS pipes which have a really cool sound. I have the MACS on a ST51 and a OS61FX.
http://www2.towerhobbies.com/cgi-bin...?&I=LXFV93&P=Z
http://www2.towerhobbies.com/cgi-bin...?&I=LXZ657&P=0
http://www2.towerhobbies.com/cgi-bin...?&I=LXFH36&P=0
Rob
http://www2.towerhobbies.com/cgi-bin...?&I=LXFV93&P=Z
http://www2.towerhobbies.com/cgi-bin...?&I=LXZ657&P=0
http://www2.towerhobbies.com/cgi-bin...?&I=LXFH36&P=0
Rob



