What glue?
05-15-2006 | 10:06 AM
#1
Thread Starter
Member
Joined: Sep 2002
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
From: middlesex,
NJ
What glue?
I am building a corsair with a sliding canopy. I made the rail for the canopy out of Styrene plastic. What glue can I use to glue butyrate canopy to the styrene rail. I have tried bondene and other solvent glues but they don't hold.
05-16-2006 | 12:53 AM
#2
Senior Member
Joined: Aug 2004
Posts: 1,390
Likes: 0
Received 0 Likes
on
0 Posts
From: East Cobb County,
GA
05-16-2006 | 03:19 AM
#3
Junior Member
Joined: Dec 2005
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
From: JakartaDKI Jakarta, INDONESIA
RE: What glue?
What about to glueing needle valve to it's machine?
I've had mine broken when crash in the flight last week, what glue should I use?
I think it should heat resistance, thx...
I've had mine broken when crash in the flight last week, what glue should I use?
I think it should heat resistance, thx...
05-16-2006 | 07:29 AM
#4
RE: What glue?
How to fix a broken needle valve:
1- Remove needle valve from engine
2- Hold it in your right hand (or left hand if you're not right handed)
3- Throw it as far as you can
4- Buy a new one and install it (they're really inexpensive)
(Or you may try soldering it)
1- Remove needle valve from engine
2- Hold it in your right hand (or left hand if you're not right handed)
3- Throw it as far as you can
4- Buy a new one and install it (they're really inexpensive)
(Or you may try soldering it)
05-16-2006 | 10:32 AM
#5
Senior Member
My Feedback: (1)
RE: What glue?
I am building a corsair with a sliding canopy. I made the rail for the canopy out of Styrene plastic. What glue can I use to glue butyrate canopy to the styrene rail. I have tried bondene and other solvent glues but they don't hold.
Use RC-56 Canopy glue. Goes on white, dries clear and bonds almost anything to anything.
Use RC-56 Canopy glue. Goes on white, dries clear and bonds almost anything to anything.
05-17-2006 | 05:55 AM
#6
My Feedback: (3)
Joined: Oct 2002
Posts: 1,348
Likes: 0
Received 0 Likes
on
0 Posts
From: Indianapolis, IN
RE: What glue?
The amount of knowlege and experience available over the internet is impressive!
Just ribbing you. Great advice on the needle valve issue. Spend your time on another area of your model and enjoy the hobby.
JEB
Just ribbing you. Great advice on the needle valve issue. Spend your time on another area of your model and enjoy the hobby.
JEB
