THE FIELD BOX FROM HELL! aka The Ultimate Field box!
 

pic 3 this is not my box, but this is the box I have and the 2 gallon jug WILL go in the bottom

THE FIELD BOX FROM HELL! aka The Ultimate Field box!
 

Judging by the Dr. Pepper strapped to the side that's my box!

THE FIELD BOX FROM HELL! aka The Ultimate Field box!
 

^^^ LOL yeah i said something about that too remember?

Re: Fuel Cell
 

Please let us know how this holds up....

I'm not really happy with my current fuel cell... I am using a 1 Gallon plastic gas can... Doesn't quite fit so I took some "Great Stuff" expanding foam and put my battery and fuel can in then put foam around it all... Then you just cut out the extra foam and you are done...

THE FIELD BOX FROM HELL! aka The Ultimate Field box!
 

The good thing is get a heat gun and shape it or hair dryer. I like the clear cell better hope it holds others have had luck

THE FIELD BOX FROM HELL! aka The Ultimate Field box!
 

Good News that 2 Gallon fuel cell did'nt leak It is holding strong

Fuel cell
 

Go to WALMART they have the jug there 5 or 6 bucks heat the jug slowly and push it into place. its a WINNER.

THE FIELD BOX FROM HELL! aka The Ultimate Field box!
 

I picked up a couple rubbermaid containers at Walmart, just over a gallon each, and both fit perfect in the bottom like a glove. No heating. I slipped my 12V motorcycle battery in between them and everything fits. I'll post a couple pics tonight. I have 2 stroke and 4-stroke fuel running off one pump to the outside of the flight box. Thanks for the tips guys!

THE FIELD BOX FROM HELL! aka The Ultimate Field box!
 

I want to see the pics, thats my problem now the battery. do you have the B&D box my 2 gallon jug leaves no room for it the (Batt)

THE FIELD BOX FROM HELL! aka The Ultimate Field box!
 

I am now creating the "Ultimate Charging Box". It should be pretty trick. This would be used to charge batteries in the field, in the house and at the office. It will come with an internal cooling fan and 12 volt home converter as well as a gel cell and two chargers. It's not even really heavy.

THE FIELD BOX FROM HELL! aka The Ultimate Field box!
 

512,
I'm at work at the moment but will post a couple pics this evening. the jugs i used hold a full gallon of fuel (each) without a problem. I did have to trim out the tray but it will still allow me some room to make some little compartments in it.

THE FIELD BOX FROM HELL! aka The Ultimate Field box!
 

Billy are you gonna do a new thread on this New "Billy Hell Charging Box"? :)

Can't wait to see this one. Man the Field Box took off real good, the Charging Box should as well.

Promised pics
 

OK, as promised here are 5 pics of my box so far. I still need to tidy up the wires and fuel tubing but it looks like it should word out fine.

The fuel 'cells' are from Walmart and were $4-5 each. They easily hold a full gallon of fuel each. I added a small vent out of brass tubing, as well as the line to draw fuel out. I did not put these in the cap, rather the top of the jug. this way i don't have to disturb any of the lines when refilling the cell. i used some silicon liquid nails to seal the flip top on the caps. These jugs didn't require any modification and fit nice and snug right down the bottom of the flight box with the battery in between them. there is some modification required to the lift out tray but I think I can still work in a couple compartments in it.

On the outside of the cart i have the power panel and fueling station. Nothing fancy on the panel, I just removed the back cover, soldered in the power line of my pump to the 12v location on the pump plug in location on the panel. put the cover back on. With the pump inside the flight box with the switch on it to 'on' all i have to do is hit the button on the power panel and it pumps.

For the fuel connections on the outside of the box, there are 4. Starting at the bottom, is the line from the pump to the plane. Above that is the other line from the pump that actually is the 'in' line to the pump. on this conection I go to either of the 2 connections above it, one to the 4-stroke fuel jug, or the other to the 2-stroke jug. essentially the fuel with come out of the jug, through this connection, back into the box to the pump, then from the pump back out of the box to the plane.

well, I babbled for long enough, here are some pictures. Thanks to all the guys on this thread for thier ideas and innovations! this is great stuff! thanks to bill and drdeath for your thoughts and tips via PM. :)

pic 2
 

close up of the jug itself.

pic3
 

the overall flight box...so far!

pic 4
 

and with the removable tray in place, noting where it has been cut to accomadate the jugs.

pic 5...last one!
 

and finally the guts of the thing. i still need to hard wire the battery instead of the alligator clips and tidy up the fuel lines. also put some silicon on the connections to avoid any possible leaks, fluid or air.

THE FIELD BOX FROM HELL! aka The Ultimate Field box!
 

Nice work I saw those jugs I just didn't like the lids didn't seem to air tight guess I could use some silicone caulk to secure them

My 2 gallon jug takes the whole bottom. If I cant figure a way to fit the 12 volt cell in the top I'll use your idea thanks

THE FIELD BOX FROM HELL! aka The Ultimate Field box!
 

Sean,

Nice work! Glad things worked out.

Lee

THE FIELD BOX FROM HELL! aka The Ultimate Field box!
 

Thanks guys. Let me know if you have any questions or need me to email any pictures.

I have a question, can anyone recommend a good 12v fuel pump? The one I have in there is a relatively inexpensive one from Tower and I'm not really pleased on the rate that the fuel is being pumped. Any thoughts would be appretiated, including time to fill a 20oz tank etc?

THE FIELD BOX FROM HELL! aka The Ultimate Field box!
 

Hey Sean

Sonic-Tronics makes one of the best fuel pumps I have ever seen. It is called the Super "X" Fuel Pump. I had a Hanger 9 one that was pretty bad. The drive shaft is only held in via friction. Didn't last more than a month or two. This one has lasted over a year so far and still going strong. Here is the link

http://www.sonictronics.com/products/pumps/prod02.htm

Hope this helps

Lee

IT FITS
 

Well the basics have worked out with no cutting Whatsoever.

2 gallon cell

12 volt M/C battery in the bottom now I can get started with wiring of the Goodies.

THE FIELD BOX FROM HELL! aka The Ultimate Field box!
 

Pic 2

My Ultimate Field Box
 

This has been an amazing thread. After reading it a few months ago, I decided I wanted to build one of these. The first box I bought was like Billy Hell's, but I wanted 2 fuel tanks, 1 for 10% and 1 for 0%. I couldn't fit everything like I wanted without cutting up the trays, so I continued to search for a similar solution. I found this box, and thought I could make it work. It has worked for me and I think it is a great box. It has storage space for everything that I want to take to the field. Thanks to everyone that contributed to this thread to get the creative juices flowing. I will attach several pictures. If anyone has any questions, let me know.

My Ultimate Field Box
 

Picture2