RCU Forums
Page 5 of 5
« First
3
4
5
Show 40 post(s) from this thread on one page

RCU Forums (https://www.rcuniverse.com/forum/)
-   Tips & Techniques (https://www.rcuniverse.com/forum/tips-techniques-180/)
-   -   New Monokote Technique (https://www.rcuniverse.com/forum/tips-techniques-180/6686800-new-monokote-technique.html)

John Wells 12-16-2012 08:35 PM
RE: New Monokote Technique
 

ORIGINAL: albsurfer
If you have to iron Monokote on Monokote, TURN THE HEAT UP HIGH!!! A guy in another forum gave me that advice and it works. You just have to put up with a few minor bubbles. You can always take a needle and pop the small bubble and iron it down quickly.

Good luck.
I don't like any bubbles. Windex, then squeegee the bubbles out, LOW heat around the edges, then brush (yes, brush) a light coat of clear Lusterkote around the edges. Works everytime, nothing lifts later. Been doing this for years.

motoman11 01-01-2013 08:17 AM
RE: New Monokote Technique
 
1 Attachment(s)
I used it to do this works great! Thanks!!

rlinus 04-23-2013 06:07 PM
RE: New Monokote Technique
 
First time post on this thread. I love that pic of the flag on your plane. Can you tell me how you laid that design out? I would love to try my hand at that. What colors were laid down first and how did you do the shadowing. I'm new at covering but would love to experiment with this design. Any details would be appreciated.
Thanks.

rye 04-23-2013 07:12 PM
RE: New Monokote Technique
 
hi
will this work with utlacoat covering? thanks

mikegordon10 04-24-2013 08:58 AM
RE: New Monokote Technique
 
Nope

steph69 10-17-2014 01:08 PM
awesome..... love the 3d flag. I am building a GP extra 300s .60 with a DLE 20cc and Ive been wondering what to do for covering, this has gave me loads of ideas, know to pick one and stick to it.


All times are GMT -8. The time now is 07:03 AM.
Page 5 of 5
« First
3
4
5
Show 40 post(s) from this thread on one page


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.