wasp .28 on revo 3.3
10-19-2006, 08:33 PM
#3
Senior Member
Join Date: Mar 2006
Location: thornton,
CO
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
RE: wasp .28 on revo 3.3
the revo is not a big block. you would have to buy a conversion kit.
Also the wasps are really testy motors. They are either good motors or bad motors. I'm running one on my aftershock. I also had the advantage of buying it from a friend. So I knew it was a good motor before I bought it.
So if you do decide to go with a wasp. Remember that their is a fairly high chance you will get bad motor. Unless it is a wasp pro.
If you want a good big block for cheap. I recommend the lrp z.28r spec 3
Also the wasps are really testy motors. They are either good motors or bad motors. I'm running one on my aftershock. I also had the advantage of buying it from a friend. So I knew it was a good motor before I bought it.
So if you do decide to go with a wasp. Remember that their is a fairly high chance you will get bad motor. Unless it is a wasp pro.
If you want a good big block for cheap. I recommend the lrp z.28r spec 3
