BlindObject

My Feedback: (11)

So, I just got a T maxx 2.5, very mint and clean. It came with a Extended Chassis with it. What else do I need to get to complete the extension? I realize I need longer braces, I already found those, but do I need anything else? It seems I'd need longer half shafts, but I don't know which ones exactly.

If anything can help me out it would be fantastic.

Snook Man

Which chassis do you have???
The stock 4908/4907 extended chassis is extended in the front.
Most other aftermarket chassis are extended in the rear.

gonggongboy

Ive been looking for braces for my chassis for a while now. Mines a Racers Edge lighweight chassis.

BlindObject

My Feedback: (11)

I'm pretty sure it's stock chassis.

BlindObject

My Feedback: (11)

Here's some pictures. Help?


http://img268.imageshack.us/i/dsc08247x.jpg
http://img687.imageshack.us/i/dsc08244x.jpg

gonggongboy

Thats what i originally had on my Tmaxx 3.3. Its the older Tmaxx 3.3 chassis 2006 edition.

Heres the Traxxas link for the part number

http://www.traxxas.com/products/nitr...ews.htm#manual

Part number is 4923A

BlindObject

My Feedback: (11)

So it's actually a 3.3 extended chassis. So do I need anything else? Will everything fit properly?

no1rick

My Feedback: (3)

You may have to change the center driveshafts. That may mean changing to a 3.3 trans also.

BlindObject

My Feedback: (11)

Ughh. It seems the center drive shafts might still work, since the back one is barely extended, and the front isn't extended at all. When all my parts get here I'm gonna try it out. DHas anyone here tried doing this?