Servos?
11-06-2010 | 07:25 AM
#1
Thread Starter
Junior Member
Joined: Aug 2010
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
From: Fort Wayne, IN
Servos?
Hi
I need some help. I dont know how big of servos I need to build this B 29. It has a 169 inch wingspan.
The flaps are about 28 inch`s long, I have four on the wing, two on each side. the plan calls for one servo each, the elevator is 51 inch`s and it calls for one servo. the rudder is 20 inch`s, one servo. I sure could use some help Rick
I need some help. I dont know how big of servos I need to build this B 29. It has a 169 inch wingspan.
The flaps are about 28 inch`s long, I have four on the wing, two on each side. the plan calls for one servo each, the elevator is 51 inch`s and it calls for one servo. the rudder is 20 inch`s, one servo. I sure could use some help Rick
11-08-2010 | 05:53 PM
#2
My Feedback: (2)
Joined: Feb 2002
Posts: 1,341
Likes: 0
Received 0 Likes
on
0 Posts
From: Orange,
NJ
RE: Servos?
http://servocity.com/html/hs-805bb_mega_power.html
If you want you can use these and all you will need is one on each surface..
Or you can go the digital route and over spend. Bigger servos + bigger gears = more strength. For that size plane I would go with the large servos.
If you want you can use these and all you will need is one on each surface..
Or you can go the digital route and over spend. Bigger servos + bigger gears = more strength. For that size plane I would go with the large servos.
