Community
Search
Notices
WildHare R/C Support Disscuss WildHare RC products in this forum. Please note, answers may be provided by Tom Fawcett (owner of WildHare RC) or by the general membership.

shake -RATTLE- roll

Thread Tools
 
Search this Thread
 
Old 10-29-2005 | 05:59 PM
  #1  
Thread Starter
My Feedback: (7)
 
Joined: Jun 2002
Posts: 616
Likes: 0
Received 0 Likes on 0 Posts
From: Bandera, TX
Default shake -RATTLE- roll

on my last four flights with the WH Edge ( 28%, Brison 3.2, Bisson Muffler), I noticed a rattle somewhere within the airframe and cannot locate it. All engine and flight components and mounts are tight, so seems the entine airframe up front, ie: firewall, bulkhead, gearmount ect.
Anyone else with some spooky noises they cant locate???
Old 10-29-2005 | 07:44 PM
  #2  
Member
My Feedback: (1)
 
Joined: Jan 2004
Posts: 88
Likes: 0
Received 0 Likes on 0 Posts
From: irving, TX
Default RE: shake -RATTLE- roll

check out the canopy one of the guy's i know had a rattle mystery noise and it was his canopy/hatch a little thin foam tape and done.
Old 10-30-2005 | 12:43 AM
  #3  
Senior Member
 
Joined: Apr 2004
Posts: 185
Likes: 0
Received 0 Likes on 0 Posts
From: Elkton , MD
Default RE: shake -RATTLE- roll

Yeah...had the same thing. I just hit the dowels with light coat of thick CA and activator...problem solved . You also might want to check your wheel pants. Even with them tight, they vibrate a bit and cause a little rattle sound when flying....no big deal.


Cap
Old 10-30-2005 | 05:45 PM
  #4  
Senior Member
My Feedback: (6)
 
Joined: Aug 2002
Posts: 207
Likes: 0
Received 0 Likes on 0 Posts
From: West Valley City , UT
Default RE: shake -RATTLE- roll

I had a similar problem with unexplained noise on my 260. I found out the servo leads from the elevators was drumming on the ultracote. I made some simple paper tubes to enclose the wires and it solved the problem.

Good luck
Dale
Old 10-30-2005 | 06:04 PM
  #5  
Thread Starter
My Feedback: (7)
 
Joined: Jun 2002
Posts: 616
Likes: 0
Received 0 Likes on 0 Posts
From: Bandera, TX
Default RE: shake -RATTLE- roll

avicrash & Cappy69

Bullseye, Canopy was the culprit, solved it temporarely with Teflon Tape over the dowels.

Thanks Guy's and Happy Landings

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.