Problem with priming
10-29-2009 | 07:43 AM
#1
Thread Starter
My Feedback: (39)
Joined: Jan 2003
Posts: 1,284
Likes: 0
Received 0 Likes
on
0 Posts
From: Decatur, IN
Problem with priming
A question was emailed to me concerning the priming of a 160. The older ECUs' were set up so the priming was initiated by trim up..stick up..wait 5 seconds.
The newer ECUs' now have a safety feature that prevents accidental priming. The new procedure is as follows:
After powering up, plug in the GSU, and chose a screen other than the first screen that appears. Then follow the normal procedure...trim up-stick-up wait 5 seconds.
This eliminates accidental priming.
Fly safe!!
The newer ECUs' now have a safety feature that prevents accidental priming. The new procedure is as follows:
After powering up, plug in the GSU, and chose a screen other than the first screen that appears. Then follow the normal procedure...trim up-stick-up wait 5 seconds.
This eliminates accidental priming.
Fly safe!!
