Community
Search
Notices
YS Engines Support Direct support from YS Performance Engines by Dave Shadel

YS 110 stoping

Thread Tools
 
Search this Thread
 
Old 03-11-2004 | 11:19 AM
  #1  
Thread Starter
 
Joined: Oct 2002
Posts: 189
Likes: 0
Received 1 Like on 1 Post
From: Mexico, D.F., MEXICO
Default YS 110 stoping

Dave:

As you know I am very happy with my YS 110, it has 1 galon of Powermaster 20-20 and the power has been very good, but this weekend the engine stopped 3 times while flying with no aparent reason, do you have any idea what can be happening? I am running the engine a little rich with an APC 15-8 prop.

Regards

Alfredo
Old 03-11-2004 | 05:09 PM
  #2  
Senior Member
 
Joined: Apr 2002
Posts: 5,385
Likes: 0
Received 1 Like on 1 Post
From: Gardnerville, NV
Default RE: YS 110 stoping

Maybe it is too rich. YS engines like to be set just off the peak. How far open is the high speed needle?
Old 03-12-2004 | 11:47 AM
  #3  
Thread Starter
 
Joined: Oct 2002
Posts: 189
Likes: 0
Received 1 Like on 1 Post
From: Mexico, D.F., MEXICO
Default RE: YS 110 stoping

The needle is about 1 3/4 open, may be about 1/4 to 1/2 turn open from peak, I have always been woried about a lean run so I may be setting it to rich, until I can see a nice smoke trail.

Thank you.

Alfredo
Old 03-12-2004 | 08:10 PM
  #4  
Senior Member
 
Joined: Apr 2002
Posts: 5,385
Likes: 0
Received 1 Like on 1 Post
From: Gardnerville, NV
Default RE: YS 110 stoping

It is too rich. The correct setting is about 2 or 3 clicks from full lean. YS engines run rich enough at this point.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.