Community
Search
Notices
YS Engines Support Direct support from YS Performance Engines by Dave Shadel

ys 53 bubbles

Thread Tools
 
Search this Thread
 
Old 04-17-2005 | 07:36 AM
  #1  
Thread Starter
Member
My Feedback: (1)
 
Joined: Dec 2003
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
From: StoneyCreek, ON, CANADA
Default ys 53 bubbles

Hello,

I love my ys own two of them.Trying to figure out why my 53 has bubbles in the line going from the regulator to the carb.The engine will some times go lean during transition only about half way throuh my flight.I replaced all the gaskets and o'rings and thought I had it licked but second day out bubles re-appeared only in that line.I see a steady plume of exhaust when flying which normally tells me eveything is o/k.But lately it's not there after half way trhough my flight.I don't think it's my tank.I don't see bubbles there and the pressure seems to be there but not as high as I used to remeber.ANY IDEAS?

Thx
Old 04-17-2005 | 09:00 AM
  #2  
Senior Member
 
Joined: Apr 2002
Posts: 5,385
Likes: 0
Received 1 Like on 1 Post
From: Gardnerville, NV
Default RE: ys 53 bubbles

Some bubbles are normal, and not a problem. If it is going lean at half tank, I would re-plumb the system. Bubbles can also be a problem to engines which are high operating time due to internal wear. Does your engine have a lot of running time?
Old 04-17-2005 | 10:49 AM
  #3  
Thread Starter
Member
My Feedback: (1)
 
Joined: Dec 2003
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
From: StoneyCreek, ON, CANADA
Default RE: ys 53 bubbles

HI running time?I don't know.What do consider high time?I have owned the motor since new for approximetly 3 to 4 years with 20 to 30 flights a season.Does that give an idea.I love this little power house.Have had some good fun with it.I wil replumb this week and see what I come up with.Thx for your quick response!!

Ralph
Old 04-17-2005 | 11:47 AM
  #4  
Senior Member
 
Joined: Apr 2002
Posts: 5,385
Likes: 0
Received 1 Like on 1 Post
From: Gardnerville, NV
Default RE: ys 53 bubbles

Engines that leak compression from blowby will make the regulator go nuts. Could be your problem.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.