ZDZ octane requirements
#3
Senior Member
Thread Starter
My Feedback: (12)
Join Date: Dec 2001
Location: Port of Spain, FL
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
ZDZ octane requirements
I just found out that the best we have is about 90.5/91
Where do I go about purchasing a ZDZ 80 ? Is it
available online only ?
Also I understand that these engines require a little creativity
to mount due to the rear carb etc and I may need standoffs or
something.
David, advise what I need to look forward to doing before building the plane.
Thanks,
L
Where do I go about purchasing a ZDZ 80 ? Is it
available online only ?
Also I understand that these engines require a little creativity
to mount due to the rear carb etc and I may need standoffs or
something.
David, advise what I need to look forward to doing before building the plane.
Thanks,
L
#4
Senior Member
Join Date: Apr 2002
Location: Gaithersburg,
MD
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
ZDZ 80
You may purchase on our website: http://www.rcshowcase.com
Mounting the engine has proved NOT to be a problem at all, and has the benefit that the rear mounted carb is much quieter because of its location. Sometimes standfoffs are required and sometimes just cutting a hole for the carb in the firewall and mounting the engine directly to the firewall is all that is required.
David
Mounting the engine has proved NOT to be a problem at all, and has the benefit that the rear mounted carb is much quieter because of its location. Sometimes standfoffs are required and sometimes just cutting a hole for the carb in the firewall and mounting the engine directly to the firewall is all that is required.
David