edge
02-25-2002 | 01:24 PM
#3
Thread Starter
Senior Member
My Feedback: (6)
Joined: Jan 2002
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
From: fowler,
IL
edge
It has a 84" wing span and it is at 4lbs 7oz so far without the landing gear or radio gear.I am going to power it with a BME 50.I hope to keep it total to about 13-14lb range.
02-25-2002 | 03:32 PM
#4
Senior Member
My Feedback: (19)
Joined: Dec 2001
Posts: 2,156
Likes: 0
Received 0 Likes
on
0 Posts
From: Evansville, IN
edge
If you want to scratch build the cowl http://www.rc-tech.net/cowl/cowl.html
you can also call stans fiberglass or the others and see if they have a cowl that is close. you might try aeroworks, there 29% edge may be very close to yours.
you can also call stans fiberglass or the others and see if they have a cowl that is close. you might try aeroworks, there 29% edge may be very close to yours.
02-25-2002 | 05:51 PM
#5
Senior Member
My Feedback: (5)
Joined: Jan 2002
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
From: Galloway,
OH
edge
You might try D&L Designs they have some large Edge cowls that might work.
http://www.dldesigns.net/
DEG
http://www.dldesigns.net/
DEG
