RE: U-Can-Do 3d 46?
 

:)Good job Cee Gee. Sounds like you have your problems solved.
Thanks,
Barry

RE: U-Can-Do 3d 46?
 

just wanted to be post #2000

RE: U-Can-Do 3d 46?
 

Hey Kokamo, Have fun with your maiden tomorrow. Don't forget to check your control surface directions to make sure they're going the right. You could have an instructor maiden it if you are nervous about flying it for the first time. I've done that many times. Then he has just handed me the controls to fly it around and bring it in for a landing. Takes all the worry away. My latest UCD I maidened myself...........[8D] It felt good.............

RE: U-Can-Do 3d 46?
 

Thanks Barry. It feels good to be in the norm again with this plane. :D It's weird when I can't fly it due to some goofball problem.

RE: U-Can-Do 3d 46?
 

CeeGee, I can't hardly wait to feel that gooooood feelin'. Hope it's not a bad feelin'. I was just looking at the weather forecast for tomorrow and it's at about 80% chance of thunderstorms. Too bad it's my day off tomorrow and it'll be the only chance this week. That SUX!!!! Oh well. Like I said in an earlier post, I got all summer to maiden this thing. Man, I was out in the shop this afternoon cleaning up my HPI Savage monster truck and decided to check the control surface directions on the UCD .... everything was going the right way. I double checked it again just to be sure. I guess you can never check too much hu? I (myself), (me), (NOBODY BUT ME) will be maidening this UCD. I had a problem with the last guy that maidened my last one, lets just say it didn't land in one peice. PM and I'll splain it to ya.

ANYWAYS, wish me luck, I may need it to get the rain out and away from the feild. Our feild is in sort of a low lying area and when it just barely rains, it floods the feild. I flew my trainer out there right after a 10 minute moderate to heavy shower and I had to dodge huge puddles. I ended up landing in one of them and flooded out the engine after the plane flipped over and landed in about 4" of water. That was a horrible day. Didn't hurt anything tho.

Sees ya!

Joe

RE: U-Can-Do 3d 46?
 

Kokamo, The UCD is a very easy plane to fly. Just to make it as fool proof as possible here's some help. Go on a no wind or very light wind day, make sure your engine is running flawlessly, (you don't want any deadsticks on take off), keep your throws on low rates, (at least at first), make sure your idle isn't too high or you'll have a hard time landing it, (it really likes to float up), get it up in the air in a gradual climb and get up high enough to trim it out, then just go for it. [8D] Once you get it flying you won't believe how fun it is.................:D:)[8D]

RE: U-Can-Do 3d 46?
 

Darn Wind[:@] just wanted to be post 2005

RE: U-Can-Do 3d 46?
 

:)Ha! Secretly I wanted to be the one that posted 2006. That is, afterall, a lucky number.
Thanks,
Barry

RE: U-Can-Do 3d 46?
 

I wanted to be like James Bond.

But I digress. Gonna build a Fokker D-1..how do ya think that will 3D?

Tom

RE: U-Can-Do 3d 46?
 

Gary... It was good here from sunup tp about 10:30 ;)
Maybe I better get a timer or use the one on the radio, ran
out of fuel again on my fourth flight [:@] .... Just got her
over the fence and she dropped into the weeds. But all
stayed in one piece:-) Who said the landing gear was
weak:D
I myself like 8269.... So how about some help guys:)

RE: U-Can-Do 3d 46?
 

im opening the gate on the back fourty right now Ron, sorry but this wind will be there tomorrow, i might be off tomorrow if it rains, that screws up my weekend, Brock (my son) will be here fri to mount his saito 91 and break it in so maybe he will be able to fly sat, if it dond blow. my 100 flys 9min easy and when i put the 11oz tank in fri i should go to 12 min.i always use a timer because when im towards the end im always low and inverted and if i run out it might scare me[sm=eek.gif]

RE: U-Can-Do 3d 46?
 

DR1 well thats a thought. You have the ele & rud for it. Your going to have to run full span ail that are at least 25% of the cord of the wing[ on all three wings ]. You know it just might work. Might have to find some depron & make a foamie DR1 to see if it will work. Who's with us ? We can start a 3D flying circus. I'm in , sign me up coach.
On second thought, I just want my 15-4's a tru-turn & some clear air for my UCD.

SPUD37 is off high right

RE: U-Can-Do 3d 46?
 

Raideron, Did you mention earlier in the thread that you downloaded UCD for AFP? I downloaded the file but it didn't work. I didn't see a waive file with it so I wasn't sure if that was the problem or not. :eek:

Heading towards 8269

RE: U-Can-Do 3d 46?
 

Well things didn't go as planned today. I needed to get tags for the new truck, no problem, went to the tax office to get the title transfered, they wanted a green slip from the inspection station. So I went to get it inspected....just my luck, wouldent pass cause someone took off the catalityc converter....sooo... I set up an appointment with the exhaust shop and was there until about 5:30, by then the winds were picking up and I didnt want to have anything to do with that. Sorry to go on and on but my day went totally oposite of what I wanted. So maybe this sunday I might be able to squeeze somthing in. Now that I think about it, I might be able to do somthing friday morning hmmmmmmm............ I'll keep ya posted.

CeeGee......I have realflight G2......is that what you are trying to get a UCD file for? Lemmie know, I want one too!

Laters, Joe

RE: U-Can-Do 3d 46?
 

Okay so here is the good stuff. Just got off the line with tower & now I'm in the wait for my 2" aluminiummmmm spinner& some 15-4W apc's. So now I'm the one waiting for the big brown truck.

SPUD37's feet dry

RE: U-Can-Do 3d 46?
 

Hey CeeGee... Yea, I have the UCD on AFP.. I have not tried it
for a while, I'm not sure if it had sound, But it worked... At times
I'm not to good on this puter, but I can try to send it to you if
you like, It's about 11megs...

RE: U-Can-Do 3d 46?
 

Seems like that plane of yours just does'nt want to get madiened eh? I went out this morning and flew the yak profile ..first good test for it ..its just as fun as the UCD ..anybody looking to build one ..check em out ..I think they make an ARF now as well...
Koko ..Hopefully you'll get some flying in on Friday..we're all waiting your report
John

RE: U-Can-Do 3d 46?
 

Check out this vid...kinda sad [&o]

Bill Hempel's 50% Edge
CRASH!


http://www.blaineaustin.com/videos.htm

RE: U-Can-Do 3d 46?
 

Spud,

or, just extend the ailerons to all three wings to make up for the surface needed. There should be enough lift on those wings. I am going to build it up in a fierce fashion and see if I can't get it to do a few things.

Tom

RE: U-Can-Do 3d 46?
 

Hi again CeeGee, Not sure if you were looking at RC-sim, I saw
a few skins for the UCD But you need the main program.. I'm
not sure but I think I got it here:

http://www.aeroflypro.com/afpdownloa...6/ucando46.zip

Hope it works...

hockeyrules99... Which Yak profile did you get?? I always wanted a E.F.
profile, (got tired of waiting) Or one from OMP... But never got one...
But now putting together one from Kangke it's a Sukhio SU-26 3D ARF....
Got a great price on it... So I got it to play a bit lower:-)
Yeah that crash is sad, any crash puts a hurt on you... But something like
that..... But there all numbered, just the way it is.... If people thinks not,
they better find another hobby.... Because it Will happen, You just never
know when:-(... Have a Great Day people:-)
As Gary said..... Darn Wind.......

RE: U-Can-Do 3d 46?
 

Keeps the epoxy manufactures in business.........I mean, you glue a chair leg together with that stuff or a bowling ball and your pretty much done for life. But an airplane, not gunna stay that way for long. Some people just get more miles out of their epoxy than others.........:eek:

Raideron, Thanks for the link. I think that's the one I tried out but I'll try it again when I get home.........[8D]
I gotta fly the UCD again soon. My thumbs are starting to feel weird............... Hey!! maybe tonight.........[X(]

RE: U-Can-Do 3d 46?
 

Liberator,
Send some pics when you get it done. I'd like to see that.

Thanks Shawn

Hey look guys I got post 2020

Gears down and locked......Flaps set.......Indicators checked......

RE: U-Can-Do 3d 46?
 

Raid, I built the 47" OMP yak over the winter ...I flew it once then it got cold here again ...so I built the U can do and took the receiver out of the yak and put it in the UCD (TEMP) yeah well it did'nt turn out to be temp lol so I picked up a new receiver last week and flew it ...it weighs in at 4lbs 10 oz .. and I'm on the heavy side with the 50 sx however WOW! no shortage of vertical power ...check em out ..Just looking at a boxxer now...we'll see
John

RE: U-Can-Do 3d 46?
 

Hey John... I hear that's a great profile... I almost got that one a while
back while waiting for the E.F. Yak proflie to come in... But I'm not to
sure on Kits:-(, So I really wanted the EF model, OMP did not have
ARF's at that time.. I guess I'm glad I did not get the kit, I have been
messing with this Kangke ARF and I'm not getting to much done... I'm
always over thinking things, So nothing gets done.... I called Kangke
twice now because they say to C.A. the wing on without taking the
covering off in that area... Well they won, That's the way I'm doing it
because they said if I have a wing failure and the covering was
removed the model will not be replaced... So we'll see.... I wanted to
use a YS-63, then I was looking at a 50SX also, But I'll just try my
46FX/tower muffler first.. Anyway have fun!!.... Back to C.A.ing my
wing over the covering..... Still does not seem right:-(

RE: U-Can-Do 3d 46?
 

My UCANDO is here!!

So now i have a few more questions. My Somethin Extra bit the dust last week so I am planeless. This is the second week of the season here and I am dying to fly. I need to run to the hobby store tomorrow, but none of the LHS's around here are very good. I need to decide how to set up my servos.

I have a Futaba 6exa with th3 4.8 battery, 4 3004 ball bearing servos and some spare s3003s laying around. I figured i could use a 3003 on the Throttle. That leaves me with 4 s3004s and 1 3003(non ballbearing). I dont know if i could find a 90 oz servo around here (can drive an hour to maybe get one) and dont know if my wallet can afford one.

3004s and 3003s both show 44 oz with the 4.8 or 57 with the 6.0

Should I:
1. Get a 90 oz Servo no matter what i have to do.
2. Put 2 3003s on the elevator and use 1 of the 3004s for the rudder.
3. Put a 3003 on the rudder (I am really just going to be sport flying it for now).
4. Any combination, but get a 6.0 V battery to get more torque.

Also i am going to try and get the 6exa to do the Ailevator so i dont need a reversing y harness, will this work, best method?

If i am going to fly Saturday i need to go to the hobby store tomorrow, any help will be greatly appreciated.