Need RC Clamp and music wire
#1
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Sep 2003
Location: Downingtown,
PA
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
Need RC Clamp and music wire
I am gluing the fuse of my plane. The balsa is cracked in a joint. I need to hold em tight.
What do you guys use to hold things for a while Is there a Clamp for RC?
Where do I buy RC store or Home depot?
AND
Also need 0.039" music wire , where do I buy it?
Pls suggest
TIA747
What do you guys use to hold things for a while Is there a Clamp for RC?
Where do I buy RC store or Home depot?
AND
Also need 0.039" music wire , where do I buy it?
Pls suggest
TIA747
#2
Member
Join Date: May 2008
Location: Minnetonka,
MN
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
RE: Need RC Clamp and music wire
Home depot will probably have C-clamps cheaper than the hobby shop. If it's a really odd shaped part that can be held together from the outside, have you considered rubber bands? They work great on curved stuff that's difficult to clamp properly.
#3
Senior Member
RE: Need RC Clamp and music wire
Really hard to understand what you're saying and what you need for clamps?If you use CA glue clamps are never needed. Sometimes depending on need I have used rubber bands for clamping. Also just straight pins will help. It all depends on what the task is to decide if and how it may be clamped
#5
Senior Member
Join Date: Dec 2002
Location: La Paz BCS, MEXICO
Posts: 1,986
Likes: 0
Received 0 Likes
on
0 Posts
RE: Need RC Clamp and music wire
http://www3.towerhobbies.com/cgi-bin...&I=LXVET2&P=ML This package has some 1mm which I believe is what your looking for.