RC YEAGER

Will do

RC YEAGER

bypassed

RC YEAGER

We sent you an e-mail regarding the Patricia parts purchase... Did you get it?

frequent flyer

My Feedback: (6)

yes , I quoted you a total and sent it.

edp

My Feedback: (5)

Here is one of Don's Illusion short kits.

frequent flyer

My Feedback: (6)

Wow! Great build Ed. I love to see the photo's when you guys build. It makes all my efforts worthwhile.

dhal22

Don, are you settled in Colorado?

frequent flyer

My Feedback: (6)

Hi David

I have my home stuff all moved in but still moving my motorcycle and machine shop stuff here. A few more storage units and shop stuff is waiting to be moved. I moved 10 truckloads so far.
We're building new shops and about another 6000 feet to make room to move the rest of the machines, spray booth, and inventory.
Still filling orders but its limited on some units. Almost caught up but a couple dozen orders still outstanding. I've got a sizeable area being drywalled now which should enable us to unpack a large amount of inventory and that will speed things up a lot. However it is going to be in the Summer before we get all move and up to full speed. Lots of new kits coming out then.
What have you got going?

Patrick F

My Feedback: (17)

Good news for all Lasercut USA and RCAIIR has partnered to offer full wood kits for classic pattern planes. RCAIIR will be selling Lasercut wood kits for the following:
Atlas
Aurora
Arrow
Beetle
Blue Angel
Bridi Escape
Bridi UFO
Bridi XLT
Kaos 60
Sun Fli 4
Sun Fli 5
Super Kaos 60
Super Kaos Jr.40
Curare
Compensator
EU-1
Deception
Mach-1
Tiporare
TF Tauraus
TF Orion-40
A6- Intruder
New Era III
Revenger
Tweety Bird
Sweetater
Gater Flea
Kraft Kwik Fli
Contact RCAIIR for availability and pricing.
This is just the beginning !!!!!!!!!!!!
Pat
Lasercut USA

edp

My Feedback: (5)

I see a Revenger in my future.

stuntflyr

Great news, Patrick!
Chris...

Roguedog

MMMmmmm! Sweetater. Got to have one!

Roguedog

Pat,

If you do get to the Beetle is it possible to design one for a side exhaust engine so the pipe can go down the side of the fuse. Would be way easier to setup for retracts as you could leave the tuned pipe on when putting on the wing or taking it off.

The other reason is you could use a standard header and tuned pipe. No special header needed.

Regards,
Bryan

Roguedog

If you do get to the Beetle is it possible to design one for a side exhaust engine so the pipe can go down the side of the fuse. Would be way easier to setup for retracts and could leave the pipe on when putting on the wing or taking it off.

The other reason is you could use a standard header and tuned pipe.

Regards,
Bryan

frequent flyer

My Feedback: (6)

Brian

I will see what I can do. Sounds like a good option. I've done the molds for the fiberglass version already but moving has taken all my time the last 8 months. Tenth load just arrived 4 days ago. About Five more loads to go.. I'm building a very large new shop here in Colorado.

I have many new kits that are soon to be announced. We are still making the foam and glass kits plus adding these laser cut versions that we all be complete kits many will have the glass cowls and clear canopies all included, of course it varies from kit to kit. I had so many request for complete kits that will be the direction I'm heading. I'm working toward releasing new kits all Summer and by Fall the list should be over a hundred kits.

Take Care
Don

flywilly

My Feedback: (121)

Congratulations Don and Pat! I am looking forward to making some kit purchases later this year. It seems 'classic' pattern may soon become more popular than conventional/current pattern (if it hasn't already). More fun, less cost... Hmmmmmm, not too hard to figure out why :-)
-Will

frequent flyer

My Feedback: (6)

Thanks Wil

It's been hundreds of hours for Pat and I to make this happen. Glad to see happy pilots/builders out there.

RC YEAGER

[QUOTE=flywilly;It seems 'classic' pattern may soon become more popular than conventional/current pattern (if it hasn't already). More fun, less cost... Hmmmmmm, not too hard to figure out why :-)
-Will[/QUOTE]

Yesss... Wow! With Don/Pat and about 6 other suppliers that I can think of right now (wont mention them so as not to hijack Don's thread) classic pattern flyer havent had it this good in a while. I hope there continues to be enough business for all

stuntflyr

Ed, That Illusion is just super.
Chris...

edp

My Feedback: (5)

Thanks Chris,
The fields are trying to dry out. I hope to have it in the air soon.

MTK

Don, what an impressive undertaking. Tremendous effort. I am in process of moving into retirement in Florida and that's just our immediate belongings. It's not a business. We are wiped out.

when you say laser cut kits what do you mean? Are they complete with all of the wood or only short kits? Built up wings and stabs and rudder or sheeted foam?

RC YEAGER

[MTK;

when you say laser cut kits what do you mean? Are they complete with all of the wood or only short kits?

Matt, I think you overlooked some key phrases in Don's answer:

"I have many new kits that are soon to be announced. We are still making the foam and glass kits plus adding these laser cut versions that we all be complete kits many will have the glass cowls and clear canopies all included, of course it varies from kit to kit. I had so many request for complete kits that will be the direction I'm heading. I'm working toward releasing new kits all Summer and by Fall the list should be over a hundred kits."

So I don't think they're short kits. Great point about the built up or foam flying surfaces. That would be nice to know.

frequent flyer

My Feedback: (6)

I am in the process of making most all of the Classic Pattern kits in two versions both will be complete kits less your engne, pipe, hardware, and radio stuff.
I will be selling foam and fiberglass kits that have the fiberglass fuse foam cores and all the sheeting, sticks, and laser cut parts to complete them.
I will also be selling all these Classic kits made all wood laser cut parts these are ribbed wings , stab, and all wood fuselage, These kits are for those that like to build wood kits. They may have a glass cowl and a clear canopy, etc. it varies from kit to kit.
As you may know many original came only as wood or only as Fiberglass, NOW you will have both! Take your pick..
​ hope that clears up things for everyone.

MTK

Thanks for the explanation. I love sticking sticks together so I am very interested in the all wood kits

RC YEAGER

Holy Cow Don! You have left no stone unturned! So many choices.