Hello all,

I like to know what should be the recommanded LiPo that I should use for the below configuration?
I'm using a RimFire 35-30-950 Brushless Outrunner Electric Motor on a plane with the following specification

Plane specification
38" Wingspan Semi scale
30" long
225 sq. in wing area
21 0z. flying weight

Motor specification
kV Rating: 950 rpm/V
Weight: 2.47oz (71g)
Input Voltage: 7.4-14.8V
Max. Constant Current: 20A
Max Surge Current: 28A
Max Constant Watts: 296W
No Load Current: 0.8A
Suggested Prop Sizes: 10x5E - 12x6E


Thanks
Borna

Thunder Power 3 cell 11.1 volt 2100mah Pro-Lite 15C constant 20-24C burst

I agree, i use that same battery on a plane with about the same specs. I used a couple other brands in the 2100 mah range also and they worked but just didnt have the punch and run time of the thunder power cell. I was thinking of trying one of the extreme cells to see if it gives me even more, but i guess it would just be overkill since the plane will never tap into that many amps anyway.

happy flying

hey, i just checked the site that i buy batteries from and they have them on sale. thunder power 2100 3 cell for $59.99
here is the page, http://www.superfastrc.com/11volich.html

one thing also about that plane, it really seems to make a difference to run a deans connector also or something similar that will carry the amps.