damaged 4 in1 ?
02-05-2007 | 03:56 PM
#1
Thread Starter
Junior Member
Joined: Jan 2007
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
From: , CT
damaged 4 in1 ?
Hi
How does one now if the 4in1 unit is ng ,not working properly.
My pot trim does seem to make any differance in the flight when turning the little screw
one way or the other,No change . Any ideas anyone Thanks.....
How does one now if the 4in1 unit is ng ,not working properly.
My pot trim does seem to make any differance in the flight when turning the little screw
one way or the other,No change . Any ideas anyone Thanks.....
02-05-2007 | 04:05 PM
#2
Joined: Oct 2006
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
From: LAWTON,
OK
RE: damaged 4 in1 ?
if you make an ajustment on the pot make sure you remove the battery and then reconnect it after you set the pot if you done it that way already then you might to check your tail motor. let my know if the first test works
