chit chat thread
 

I have decided to make a chit chat thread with everything rc.

Join in on the discussions.

Just keep it clean.

RE: chit chat thread
 

Howdy me ole bean :D:D

BJ:)

RE: chit chat thread
 

Yo what up Outlaw :D

What's been happenin champ ??

RE: chit chat thread
 

hey boys,

welcome to my thread. Ive been flying my mcpx alot lately. I have it set up really good now. Im just waiting till xtreme productions get all the parts for it and then i will put in an order. Looks like they have new carbon blades as well. The new frame looks good too.

After i master it i wont to go brushless. Im just having fun doing fast circuits around the park. I did get a intellect 240mah 25c 1s lipo for it at the LHS. Its a bit fatter then the hyperions. But i got about 4mins out of it where as my hyperions i only get about 3mins out of them.

We finally got my dads rc boat setup and going really well. It actually has a turnigy DX 70A airplane esc in it. We cut off the cooling jacket from the old esc and heatshrunk it to it. Works really well. The only thing is that it cant find the neutral zone so we have had to pull the trigger full forward with a rubber band. But at least it works.

Dads rc boat hammers now. I was fanging it around when i decided to go around the pilion underneath the bridge and i beached it up on the oysters. I had to go swim for it and it was very cold. Oh well the boat was ok but my manhood suffered a bit. Dad just needs to fix his leaks in his boat and his is good to go. My boat needs a bit of work to get it going well but this weekend we should get it sorted.

Im hoping my rarebear arrives anyday soon now. I cant wait. I think it will get a paint job first of all.

I think i will get a 35-36 1400kv motor for the hyperion snyper and then put the 35-30 1100kv motor back into my extra 260. The extra 260 was stupidly fast with the 1700kv motor in it. I will have the rare bear soon and i have the parkjet for speed.

Anyways thanks for your support guys and happy flying.

Maybe you can just copy and paste this into the other thread, lols.

RE: chit chat thread
 

Half ya luck Stal, at least you been flying.

It's been so windy here that I haven't flown in over 2 weeks and when ever it did ease up, I was busy doin something else [:@].

Ahh wells, will get out there again soon.

RE: chit chat thread
 

...</p>

RE: chit chat thread
 

LMAO, just reported another of his posts. That's 2

RE: chit chat thread
 

Which 'For Sale' thread, Meebs?

I wanna take a squiz :D

BJ:)

RE: chit chat thread
 

...
</p>

RE: chit chat thread
 

...</p>

RE: chit chat thread
 

yeah im so over him. Get him banned

I just came home from work after a half day and realised i have some washing here to be done. Its too windy for a fly right now anyways. Hopefully right on dusk i can take my mcpx out for a blurt. I love this little thing now. I have tried a few loops and rolls but every time it ends up into the dirt.

Anyways have fun boys

get the other lads in here

RE: chit chat thread
 

Alright that's 3 reports, let's see if we can get a 4th in there. I get the feeling he's DEFINITELY going to want to respond to this last one :D

RE: chit chat thread
 

yeah thats great meebo but the scumbag has prolly followed us into here. Remember he has no life. Anyways im a huge believer in karma so he will get his again soon.

Just found out i have the day off so i will be going for a fly in the morning. Not sure what planes i will take but i sure know ill be taking the mcpx. I have like 10 or so lipos for it now. I can also use up my 160mah lipos in parallel with the cable i have here. I just need a better way to mount two 160mah hyps.

I have my mcpx dialed in so well now. I dont even want to do all the fancy inverted stuff yet. Im just having so much fun wizzing it around the park doing fast circuits above my head (trying not to take my head off).

Ive been trying to get the mcpx in pheonix flying as well as my one in real life.

Meebz whats the simplest way to go brushless with this little thing? I know you posted it before but are we all waiting for this new frame so we can fit bigger motors on it.

I guess we are the three muskateers in here. At least i know who really cares.

RE: chit chat thread
 

I haven't done the brushless mod yet, I have all the parts here except the frame. I COULD mod the stock frame but I think I'll wait and get the RKH frame then do the mod, the RKH frame has been designed to accept multiple motors so it's the easiest choice just not the cheapest one :(

My mCP is down at the mo with a broken main shaft, I have a spare but I'm not going to fix it until I've finished these two HUGE assignments due next week, same goes for the hawk and the 120SR. The hawk just needs a bit of glue and the 120SR needs the new 5 in 1 and other bits installed but I'm waiting to fix these too as I don't want to divert my attention from my Uni work.

Kinda suck but hey .... we gotta roll with the punches and Uni is more important :(

RE: chit chat thread
 

good boy meebo.

it will pay off soon mate

do you know if the xtreme production frame will accept multiple motors as well?

oh well i guess ill look into it when i get sick of doing fast circuits around the park.

I think the end of September all of the xtreme productions parts come out. They have some carbon blades that look interesting. Might give a more crisp flight.

Meebo have you seen the guys fitting the brushless mods are starting to use a sr120 tail boom and motor on them. But i think there using pretty large 1s lipos.

Anyways im still having fun with mine. Its all good.

RE: chit chat thread
 

Not sure about the Xtreme frame mate, lotta opinions goin round that the Xtreme and MH frames will be too heavy, noone really knows yet as they aren't released but the RKH frame is tried and tested with spare parts that will be available which is a first so that's a big point to RKH.

I'd be careful with things like the carbon blades too, not exactly as tough as stock blades and dear as poison but as long as you don't crash into solid objects you should be right. There's some mixed reviews from people using the KBDD blades which are cheaper than stock, most people say they're flippin awesome and a small amount reckon they're crap.

The 120SR is a good option for brushless but it's too heavy, there are some good reviews coming outta other more size appropriate tail motors like the Bravo SX and 4G3 motor with the 4G3 being the best so far, I've got some time up my sleeve till my brushless so I'm going to see what comes of it but for now the 4G3 motor is the bees knees.

Anywhos that's my wrap up :D

RE: chit chat thread
 

Whats the dealyo anyways Stal, What's the times frames of when you can start posting again ??

RE: chit chat thread
 

yo wat up biatches!

Man I forgot this forum was here!

RE: chit chat thread
 

Is this the same Jaskel from the RCG for sale thread ??

RE: chit chat thread
 

meebz i can start posting when my points get below 5 points. There currently at 10 points.

Hey jaskel could you please talk to the admin and explain to them what emeber bender was doing in the for sale thread. He started threatening my in personal messages. He dobbed me in and now im banned for like 4 months mate. I really dont think its fair at all.

Im gonna go search for this new oz rc for sale thread. Is there any way we can ban ember bender from it or jaskel can you just remove his comments so he doesnt start problems again mate.

RE: chit chat thread
 

yeah this is the same Jaskel :)

Yeah man im making sure the thread is clean from everyone!

Ill have a chat to the aussie moderators and see what the go is!

People really need to calm down on forums eh!

RE: chit chat thread
 

People like Ember Bender make it REALLY REALLY hard to keep composed, the guy is a looney tune and just gets under your skin with every word he speaks.

I already had an issue with they guy because of the outcome with Stalyoni which it totally BS and unfair and the dude comes at me through PM's for making a comment on the for sale thread and just goes ballistic at me, personal attacks, name calling, provocation, bringing up that I'm the cause of the original thread being closed when it was his insistent barrage of ridiculous and stupid posts, it all started with him and everyone was diggin at him. That's why the thread closed.

At the moment he's sittin pretty whilst Stal is banished, anyone who knows Stal, knows that PM was out of character and was provoked to the point of cracking. One lapse of judgement and he's gone, not fair man considering the circumstances.

RE: chit chat thread
 

yeah thanks so much jaskel, i really appreciate it.

Well said meebo. What i said in the return PM was fairly nasty but i was prevoked and i snapped. I still dont think its fair that i cop the ban and he sits pretty.

Oh well hes one idiot in this whole world. Im not gonna let him ruin my fun.

I should have some rc fun in the morning.

RE: chit chat thread
 

That's the spirit, Stal ;)

Get back on that horse.

Why let one idiot ruin the thing you love doing and lose the mates you have made along the way.

Forget about him and we'll all move on and enjoy our passion doing what we do best - flying RC :D

BJ:)

RE: chit chat thread
 

yeah stuff him BJ

why do you always have to have more posts then me eh.

Who would of thought one little micro heli called the mcpx could bring me so much fun.

Whats going on with hobbyking and there postage times. It seems it takes more then a month to get something from them now.

Oh well as long as my rare bear arrives safely. I cant wait to fly this little pocket rocket.

RE: chit chat thread
 

two admin had a look at my suggestion post but did nothing about it.

Oh well ill have to post in here for now.

Im going to gather up the planes and go for a fly now.

RE: chit chat thread
 

ok so i have stepped down to his level. Ive reported about 4 or 5 of his personal message. He should be getting the ban hammer anytime soon now.

I took my extra 260 and parkjet down for a fly this morning.

The parkjet is very easy to hand launch now. Once you know the right method then its easy. I found i have plenty of ailerons but not much elevator. I was able to roll it with easy but pulling back on the stick is a task. I put two lipos through it. I still think its not fast enough on the 2s setup but i think ill leave it like this as i need to use up the 2s lipos i have. I know for sure if i put it on a 3s setup i will crash it for sure. Its a pretty boring little wing but it gives me something else to fly.

I had a couple of flights with my extra 260 as well. It has a 35-30 1700kv motor and an apc 8x4 prop. I have come to the conclusion that this motor is way to fast for this plane. In the near future im going to take the 35-30 1100kv motor thats on the hyperion snyper and put it back into the extra 260. I think ill then order a 35-36 900kv motor for the hyp snyp and put a 12x6 prop on it.

The extra as is, is a blast to fly but its only good for fast passes. I will be able to do this with the rare bear soon. Although the extra does not have much of a rudder i might mod it so its a little bigger soon and try some 3d with it.

Anyways i want to get my hyperion snyper flying really good. Theres so much this plane can do if set up right. Hopefully a new motor and prop will help it alot.

I put a few packs through my little mcpx as well but the wind came.

They literally turned the sprinklers on me at the park i was at. So i packed up and came home.

Had a good day of flying. Now to jump on the sims and do some crazy flying.

RE: chit chat thread
 

stalyoni I did not know it was possible to have too much power. Don't use a smaller motor make the airframe stronger. </p>

RE: chit chat thread
 

i have already strengthened the wing in the extra 260. The frame is as strong as it will be. I have run the 35-30 1100kv motor with a 11x5.5 prop on it before and it performs amazingly. The 1700kv motor on it is overkill. It means i only have a shorter flight time as well. Ill see what happens when i get some funds up.

Im also waiting to see what this rare bear has got in store for me. If its as good as the boys say then its the only plane ill ever need from now on.

RE: chit chat thread
 

http://edge.ebaumsworld.com/mediaFil...3/81797505.jpg

i guess his lipo hit LVC

RE: chit chat thread
 

for today is a glorious day boys

guess whos on a vacation

EMBER BENDER
on a vacation

hhahahahahahahhahahahahahahahaha

sucked in, i hope he got 4 months like i got. Keep reporting all his posts boys i wanna see him go down and never come back.

I spent the arvo on the sims but mostly on realflight. I got a model of a PA extra and its very dialled in. I was mostly working on a routine rather just flying around. Im definitely getting alot better.

Anyways happy flying all. Seeing him on a vacation has made my day

RE: chit chat thread
 

AWESOME IT WORKED ......

That's cool and exactly what I was pushing for .... although his last post was at 4:50 so that's only 20 mins ago, just hope that's his last for awhile.

RE: chit chat thread
 

man i reported like 4 of his posts and about 4 personal messages. Really nasty ones so he would of gotten 4 months or more for sure.

Anyways meebo hope the uni work is coming along nicely for you mate. It will pay off in the long run. Hopefully on the weekend sometime we can organize a pheonix session with all the boys.

RE: chit chat thread
 

Let's hope so mate, it's only fair considering his filthy and aggressive mouth.

I may just have a play tonight, I need to unwind already. Between work, uni and home i'm frazzled.

RE: chit chat thread
 

http://www.rcgroups.com/forums/recentwarnings.php

Looks like he got an instant 10 point ban due to a PM he sent you this arvo and 2 separate points for the PM's he sent me.

That's 12 points by my count :D<br type="_moz"/>

RE: chit chat thread
 

oh man thats golden. That means his gone for 4 months as well.

HAZZA!!!

is there any way i can find out how many points i have. Im pretty sure i have like 12 or 13 as well. Oh well its not the end of the world.

My life is going so well since i started on this new medication and i dont really care anymore.

I just cant wait for my rare bear. More so the 1000mah 3s lipos with it. This means i can get my bigger 3d hawk up in the air as well.

Man i so want a PA of some sorts but i still need to work on my skill level. This will take a few more crashes yet.

RE: chit chat thread
 

I've just been lookin to see if we can view our current points but came up empty.

Perhaps getting a plane like a PA will force out the cautious flier in you and because it's so nice and expensive your less likely to take risks and there fore won't crash.

Just enjoy some scale flying with it for now until you get better with the throw arounds, who knows ... maybe by having such a precision plane your flying skills will improve faster as it handles better *shrugs*

Well that's my logic and I'm stickin to it :D

RE: chit chat thread
 

Where do you get to see your points (and when they expire) ??

BJ:)

RE: chit chat thread
 

I just noticed that I am the only one on this thread not from Australia

RE: chit chat thread
 

No problem. Just get banned from RCG and bully someone. You'll fit right in.